EmpireTech aka Dahua LPR Settings

You don’t.

Set focus, leave live page, go back to focus menu and hit save a couple times.

On live page it will always default to 20. Just make sure and change to 1 before making adjustments
 
  • Like
Reactions: samplenhold
Got it - thanks. Right now I have a car out there and am trying to adjust Day setting to be as sharp as possible. I dropped the sharpness which really made things a bit clear, is that normal that a lower sharpness will lead it to be clearer. Am attaching picture of current Day setting. Also, I set the focus to 1 as you suggested.
 

Attachments

  • 2025-10-21_15-56-53.png
    2025-10-21_15-56-53.png
    9.6 MB · Views: 7
  • 2025-10-21_15-56-32.png
    2025-10-21_15-56-32.png
    79.4 KB · Views: 7
Got it - thanks. Right now I have a car out there and am trying to adjust Day setting to be as sharp as possible. I dropped the sharpness which really made things a bit clear, is that normal that a lower sharpness will lead it to be clearer. Am attaching picture of current Day setting. Also, I set the focus to 1 as you suggested.

Yeah it’s a bit different with plates. Too much sharpness usually makes for problems on most scenes anyway.

You need more zoom or you’ll be wearing thick glasses like me before long :lmao:
 
alright hard lesson learned did something on Day where now can't even read the license plate - ugh - completely get the frustration.

need to start all over again to figure out what happened - the illuminator on the Day - should that still be zoom Priority?
 
Illuminator is for the IR, no good in Daytime. Useless. Off

Nighttime use Manual and 100