NVR5208-8P-4KS2E firmware update problems with Zoom using IPC-HDW2231R-ZS cameras (EmpireTech Andy's hardware)

bigredfish said:
Ni idea what you're saying b ut I guarantee there are 3 ways to zoom the camera (optical not digital zoom)

Using SmartPSS
Using the camera Web GUI,
And using the NVR web GUI I show above.

4 ways if you want to count using the DMSS app

All of which I just did
Click to expand...
I was able to do all of these zoom until the NVR upgrade. Now unable to do partial zooms using IE Web GUI, all other methods I can still use partial zooms.
 
Nick70068 said:
I seldom zoom, only if necessity dictates the need for closer inspection.

And I have to disagree. I believe the NVR software controls the interface between the user and the camera's operation. Using the Web access doesn't give you direct access to the camera but is a bridge between the user and camera.
Click to expand...

You do realize people can access the camera GUI without an NVR.
 
Nick70068 said:
I was able to do all of these zoom until the NVR upgrade. Now unable to do partial zooms using IE Web GUI, all other methods I can still use partial zooms.
Click to expand...

Web GUI on the NVR or Web GUI on the camera?

There is no difference in what it does, just a different way of accessing it
 
I dont have a 2231 sorry, I have a couple of old 5231's the big brother and just plugged one and am able to zoom fine all methods.
 
Not worth it if it were me.

You have two other methods to accomplish what you need
 
  • Like
Reactions: Nick70068
You must log in or register to reply here.
Top Bottom