NVR5208-8P-4KS2E firmware update problems with Zoom using IPC-HDW2231R-ZS cameras (EmpireTech Andy's hardware)

bigredfish said:
Ni idea what you're saying b ut I guarantee there are 3 ways to zoom the camera (optical not digital zoom)

Using SmartPSS
Using the camera Web GUI,
And using the NVR web GUI I show above.

4 ways if you want to count using the DMSS app

All of which I just did
Click to expand...
I was able to do all of these zoom until the NVR upgrade. Now unable to do partial zooms using IE Web GUI, all other methods I can still use partial zooms.
 
Nick70068 said:
I seldom zoom, only if necessity dictates the need for closer inspection.

And I have to disagree. I believe the NVR software controls the interface between the user and the camera's operation. Using the Web access doesn't give you direct access to the camera but is a bridge between the user and camera.
Click to expand...

You do realize people can access the camera GUI without an NVR.
 
Nick70068 said:
I was able to do all of these zoom until the NVR upgrade. Now unable to do partial zooms using IE Web GUI, all other methods I can still use partial zooms.
Click to expand...

Web GUI on the NVR or Web GUI on the camera?

There is no difference in what it does, just a different way of accessing it
 
bigredfish said:
Web GUI on the NVR or Web GUI on the camera?

There is no difference in what it does, just a different way of accessing it
Click to expand...
I can do partial zooms when I access the "camera's" Web Gui at the NVR console, and through the Web GUI.
But unable to partial zoom using the Web GUI.
 
I dont have a 2231 sorry, I have a couple of old 5231's the big brother and just plugged one and am able to zoom fine all methods.
 
You must log in or register to reply here.
Top Bottom