Search results

  1. R

    Use a clone to have two different IVS areas alert differently?

    makes sense, and yes, you can filter for confirmed alerts in the console. I will try, see if it plays nice with my alerts (pushover) for main... thanks:) add: I think I would have to make the other cameras confirmed alerts also tho...
  2. R

    Use a clone to have two different IVS areas alert differently?

    This has been working great, thanks guys. One additional question: Since both the main and secondary IVS triggers end up in the clip list in BI at left, when using the "Alerts" filter, is there a way to assign something like "Flagged" automatically to the "main" IVS triggers so I only see them...
  3. R

    Use a clone to have two different IVS areas alert differently?

    Thanks:) I had the first two parts down ok, but I couldn't see a way to differentiate the two IVS rules in the Alert tab, I was missing #3, the "required AI objects" part, thinking that was only for the built-in BI AI or other external AI. That's the missing part that should allow me to...
  4. R

    Use a clone to have two different IVS areas alert differently?

    Thanks jrbeddow, I'm not using nvr, just the cameras IVS.. I think I'm ok with setting two different IVS rules, and having BI see them on onvif config. I'm simply trying to have both Tripwires record, but only one alert. I cant seem to see where I can tell alerts to pay attention to one onvif...
  5. R

    Use a clone to have two different IVS areas alert differently?

    Thanks wittaj, OK, not as simple as I thought (for me!) I created another rule for that cam as below: (with "road being the added rule I dont want alerts on) Then set BI Onvif But where do I tell BI to listen only to Road or Main? and where do I setup the alerts for one or the other, not...
  6. R

    Use a clone to have two different IVS areas alert differently?

    hmmm, simplicity always rules? I'll try that! Thanks:)
  7. R

    Use a clone to have two different IVS areas alert differently?

    I'm trying to do two different BI alerts from one t180 camera: The first is a "normal" IVS tripwire Onvif trigger that makes BI record mainstream, alerts Pushover, etc. All good there. The second is I'd like a different area of the same camera to trigger, causing a recording of main stream, but...
  8. R

    Detecting wildlife with Dahua cameras

    I Think that option to choose "which" animals is available on the Pro Cameras (like on my T5459-Pro) firmware, but not on the latest (R8) version of the T54IR-S3 cameras. At least that's what I see on my versions.
  9. R

    Detecting wildlife with Dahua cameras

    In the latest webUI, combined with the S3 Dahua (or Andy Cams), you do indeed see "animals" as a choice. I only use the cameras IVS rules as above, as opposed to CPAI or Blue Iris' latest built in AI, so I don't get any tagging as Dog or Cat, etc. The clips just say "Tripline" or "intrusion"...
  10. R

    Help with UI3 and Tailscale

    If I leave BI's IP address (192.168.1.xxx) in BI's webserver fields, and try to connect from outside with Tailscale running, and use TS's IP to connect to UI3, that works fine in or out, but alerts in Pushover show the alert, the thumb, but If I select UI3 or Hi Res in Pushover it tries to...
  11. R

    Powershell Script to Send Pushover Notifications with a Camera's or Cam Group's Current Image

    agreed. IF you don't see battery drain, then just leave it on and one shortcut to UI3 will work everywhere.
  12. R

    Powershell Script to Send Pushover Notifications with a Camera's or Cam Group's Current Image

    correct. You could turn Tailscale off on the phone, and just flip it on when needing to access UI3 if worried about drain. Tailscale support says it's an issue if running TS as Exit Mode... I do not.
  13. R

    Powershell Script to Send Pushover Notifications with a Camera's or Cam Group's Current Image

    I have an Android, and I have not noticed Tailscale running down my charge. It might , I just I haven't noticed or tested. (I did use Zerotier previously, and that also ran full time (well, sometimes after a reboot I needed to turn it back on), but I don't see a difference power wise. I do like...
  14. R

    Powershell Script to Send Pushover Notifications with a Camera's or Cam Group's Current Image

    I use my tailscale IP (100.69.xx.xx) in all the webserver fields... the Lan, Adapters, and WAN (though I don't think the WAN one matters) I see UI3 both on my home net (with tailscale running all the time) as well as away from home (again, with tailscale running on laptop, phone, etc) accessing...
  15. R

    Intermittent BI Crashes, usually middle of the night, assistance/thoughts please

    BI 6.0.5.0 had issues, including crashes. 6.0.5.1 now posted, fixed that (for me) . That may or may not be your issue, but start there!
  16. R

    Blue Iris Updates - Official Thread

    6.0.5.1 released, playing nicely for me (it wasn't for 6.0.5.0)
  17. R

    Tailscale: access your LAN with BitDefender Firewall and Tailscale

    I replaced ZeroTier with Tailscale, easy install, all worked well until I tried to access another PC on my LAN... and I could not. I eventually figured out that BitDefender firewall was blocking LAN traffic when Tailscale was active. Turning off either Bitdefender or Tailscale fixed it, but if...
  18. R

    Blue Iris UI3

    @bp2008: I sometimes try to scrub through a whole night's recordings quickly in the console, but because I have recordings broken into a new file every 2 hours, the scrubbing stops at the 2 hour mark, and I have to re-maximize the camera I'm looking at to continue (and sometimes replace the...
  19. R

    Blue Iris UI3

    yup.. I had group aspect in the console set to 4:3 to give me a better look when clips were showing at left, but that messed with UI3. Thanks :)
  20. R

    Blue Iris UI3

    In UI3, When I right click on any camera (in a group... while live view, or timeline, or clips are selected, ) and choose "Group Settings", all I see is: I can't seem to find any place with the settings choices you talk about... someplace else?
  21. R

    6.0.3.6 New Logfile Entries

    yes, on mine it says "security software detected: Bitdefender" and no error posted. Great!
  22. R

    6.0.3.6 New Logfile Entries

    I use Bitdefender. I got the error messages in BI after updates... I had added the blue Iris folder to exclusions in Windows Defender, and blueirisadmin.exe as a process to the exclusions also, and still had the errors. I just added blueIris.exe (in addition to BlueIrisadmin.exe), and the error...
  23. R

    6.0.3.6 New Logfile Entries

    I do not have MsMpEng.exe running as a process based on task manager and on Process Explorer-Sysinternals
  24. R

    6.0.3.6 New Logfile Entries

    yes, I see entries for both defender and Bitdefender. No big deal, just clear the log entry and the yellow icon goes away, but best if he can fix it...comes back each update. (I did reboot after 6.0.4.1...still shows on every update)
  25. R

    6.0.3.6 New Logfile Entries

    Reboot had no effect. still get the BI error message, and log shows both defender and bitdefender.
  26. R

    6.0.3.6 New Logfile Entries

    I did have the periodic windows defender scans set to ON, and I thought that was the source of the message. But I turned that setting off and still get the message. (as in the screen grab above). I did not reboot though, I will try that.
  27. R

    6.0.3.6 New Logfile Entries

    I have bitdefender, and as far as I can tell windows defender is off, but I still get the warning: /5/2026 8:02:54.123 PM App Started version 6.0.4.1 0 3/5/2026 8:02:54.156 PM App Intel video hardware detected 0 3/5/2026 8:02:56.002 PM...
  28. R

    How the Olympics Are Mixed LIVE 4,000 Miles Away

    OBS (Olympic Broadcasting Services) handles the feed for most of the olympics. NBC gets to "double up" their own cameras, etc for USA interest events and competitors.
  29. R

    APC backup power supply questions…

    APC (now Schneider) customer service is also good. I had a UPS start beeping at 2 years, so they sent me another battery free. That didn't fix it, so they sent another APC UPS (same 1500M), also free, which did fix it, and now I have a second battery to rotate in. I power all my computer stuff...
  30. R

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    But, I don't think either Yolo includes "deer" (my nemesis). IPCam-Combined (and animal) does...
Top Bottom