Dahua SD49225XA-HNR Auto Tracking Enabled Firmware.
- Thread starter ljw2k
- Start date
Thanks for the quick response.
I just checked at the firmware on my 49425XBNR is the same as the current version on the Dahua site for the SD49425XB-HNR
DH_SD-Prometheus_MultiLang_NP_Stream3_V2.812.0000032.2.R.220804
Got this version on my 49425BXNR but the tracking menus aren't showing up in the Deep IVS menu
There is not tracking menus or tabs - it is part of the setup.
Make sure you are using Internet Explorer - not Edge or Chrome with the IE tab. The Dahua PTZs need Internet Explorer or your track time will default to 15 seconds regardless what you put in and some of the settings may not show up.
You need to set up a preset.
Then you need to set-up the Smart Plan with Deep IVS for the presets you want to track.
Then select the object filters you want.
Then go to Deep IVS Rules Config page and you should see Track Time under alarm and Tracking Target size slider.
When setting up IVS rules, I strongly recommend you use intrusion box with appears and crosses instead of tripwire. And less is more. One IVS rule.
Leave min size as 0,0
Make sure that Motion Detection and Smart Motion Detection are turned off.
I repeat, make sure Motion Detection and Smart Motion Detection are turned off LOL.
If you do not have the above screen with the Tracking Target Size, then you have a version without autotrack.
Teamviewer me your ID and pass via PM and will do a basic set up for you if your struggling.
Thanks guys, I tried everything and couldnt get the tracking target slider to come up. Nearest thing I saw was a Set Track Rate tab but that was in the Global setup tab under Deep IVS and it didnt do anything when clicked
Turns out this one is labeled 200312 build date but it is actually a 201123 build when you download it.
Did some digging on here and found the 200312 build, got it installed on my 49425XBNR and the tracking menus popped up right away.
So i guess it was a user error
Last edited:
Has anyone had issue with the auto tracking function disabling? It seems it only lasts a day for me, all I have to do is go back into the Deep IVS tab and click SAVE to get it back.
Looking at the log I see this activity happening usually in the 20:00 but sometimes 02:30 hours on several different days now. My VMS has capabilites to manage settings on the camera which I have disabled. I also have auto maintain on the camera disabled.
Any ideas? Is Dahau going in and taking tracking setting away while I sleep?
Looking at the log I see this activity happening usually in the 20:00 but sometimes 02:30 hours on several different days now. My VMS has capabilites to manage settings on the camera which I have disabled. I also have auto maintain on the camera disabled.
Any ideas? Is Dahau going in and taking tracking setting away while I sleep?
Attachments
Has anyone had issue with the auto tracking function disabling? It seems it only lasts a day for me, all I have to do is go back into the Deep IVS tab and click SAVE to get it back.
Looking at the log I see this activity happening usually in the 20:00 but sometimes 02:30 hours on several different days now. My VMS has capabilites to manage settings on the camera which I have disabled. I also have auto maintain on the camera disabled.
Any ideas? Is Dahau going in and taking tracking setting away while I sleep?
Someone hacked you? Neighbor taking a dump in your yard and doesn't want you to see it LOL
49425 continues to reboot in the 20:00 hour when Auto tracking has been working on fw 200312
I didn't have AT working yesterday and it didnt reboot itself so it must be something written into the fw causing it to do this when AT is on.
Track time is also about 2 seconds no matter what its set for, yes I used IE to set it.
Anyone else with a 49425 have auto tracking working?
I didn't have AT working yesterday and it didnt reboot itself so it must be something written into the fw causing it to do this when AT is on.
Track time is also about 2 seconds no matter what its set for, yes I used IE to set it.
Anyone else with a 49425 have auto tracking working?
My 49425 works fine with autotracking. I agree with @ljw2k - it sounds like a power supply issue perhaps when it kicks into infrared and is drawing more power. Make sure you have POE+ and if on a switch make sure it has capacity to run it.
Hmm interesting possibilty, Ill have to check what the switch is rated for. The nightmode switch happens about 30-40 mins sooner than the reboots have been happening. Maybe the draw for the IR coupled with what the AT draw is could do it?
Im not able to get out to the location for a few days so I just turned the IR off for now to see what happens tonight Funny though that it looses just that setting on a reboot but everything else stays.
I have: DH-SD49225XA-HNR-S2
Is this the same camera, does it support auto tracking? The firmware I'm on does not have this option, but according to the pdf below it should:
Is this the same camera, does it support auto tracking? The firmware I'm on does not have this option, but according to the pdf below it should:
I am still having issues with the auto tracking only working for a few days so I was taking a look at the log and found some interesting things.
I had some illegal login attempts and it lists the ip addresses attempting to login and they came back as being from Ukraine and Russia. It appears they weren't succecful in logging in.
Found another entry for a Login and Logout at an unusual time and the ip adresss was from Malaysia, city being Petaling Jaya So a google search of Petaling Jaya and Dahua reveals Dahua has a location there. Log shows they were logged out exactly 4 mins after the login so Im guessing it was an auto logout but still looks like a succesful login.
I had some illegal login attempts and it lists the ip addresses attempting to login and they came back as being from Ukraine and Russia. It appears they weren't succecful in logging in.
Found another entry for a Login and Logout at an unusual time and the ip adresss was from Malaysia, city being Petaling Jaya So a google search of Petaling Jaya and Dahua reveals Dahua has a location there. Log shows they were logged out exactly 4 mins after the login so Im guessing it was an auto logout but still looks like a succesful login.
