Static Objects Triggering with BI AI turned on

CCTVnewbie810

CCTVnewbie810

Getting the hang of it
Sep 30, 2025
124
44
USA
I recently switch to the built in AI confirmation and started using it in conjunction with my IVS on my Dahua cameras as I was having a lot of false triggers even with sensitivity turned down on the IVS. However, now with the new BI/AI, the periodic scan is gone and I am getting some triggers on static objects. Usually at night, a bug may fly past the camera quick, triggers it, then the AI confirms a static vehicle in driveway and sends the alert. Anything I can do about this?
 
Periodic scanning was replaced by Object Tracking, so in addition to the "Ignore non-moving objects using object tracking" do you have Object Tracking enabled on the AI tab? That extends the static object tracking beyond that done per trigger.

I had many issues with static objects in v5.x where car head lights and rain were a nightmare, along with more than one static object as BI assumed the order was always the same from AI analysis and it wasn't. I had quite a few emails with Ken in the early v6.x days and it's now way better than it was but you need Object Tracking enabled and the shorter times it now defaults to (10/0.8 secs) compared to the couple of minutes it was in v5.x days.
 
  • Like
Reactions: jaydeel, Bruce_H and CCTVnewbie810
rkn said:
Periodic scanning was replaced by Object Tracking, so in addition to the "Ignore non-moving objects using object tracking" do you have Object Tracking enabled on the AI tab? That extends the static object tracking beyond that done per trigger.

I had many issues with static objects in v5.x where car head lights and rain were a nightmare, along with more than one static object as BI assumed the order was always the same from AI analysis and it wasn't. I had quite a few emails with Ken in the early v6.x days and it's now way better than it was but you need Object Tracking enabled and the shorter times it now defaults to (10/0.8 secs) compared to the couple of minutes it was in v5.x days.
Click to expand...
The Help buttons are not launching to matching PDF documentation. Is this dialog currently undocumented? Could you paste a few screenshot examples?
 
You must log in or register to reply here.
Top Bottom