Failed, HTTP code -2147483637, check API key IN Blue Iris
- Thread starter Mach1
- Start date
Bruce_H
Pulling my weight
Can you provide some context of what you are doing that causes this error, is this an error in BI or the Android or Apple App, some hints would be helpful!
Yes of course , On My desktop running BI 5 latest Windows 11 I think it might be fire wall related .
Found another red triangle in BI status Line reads ( 1944 1/7/2026 5:28 PM DIO COM 3:2 ) And the mystery continues
Bruce_H
Pulling my weight
BI 5.9.98x64 Sorry for the slow response time. I am searching all over the web for answers to this but all the different terminology referring to similar parts is frustrating.
Last edited:
Did this happen after an update to BI?
I had a Sunba once and a BI upgrade rendered it useless. Fortunately I had exported out the BI camera setting prior to the update and was able to import that camera setting in to get it working again.
If this isn't a result of an update, then delete the camera in BI and re-add as the BI camera setting likely corrupted.
I had a Sunba once and a BI upgrade rendered it useless. Fortunately I had exported out the BI camera setting prior to the update and was able to import that camera setting in to get it working again.
If this isn't a result of an update, then delete the camera in BI and re-add as the BI camera setting likely corrupted.
Bruce_H
Pulling my weight
I' ve messed with the settings so much I am just about to scrap the camera. It doesn't respond to input a lot of the time because live feed stalls ,slows down or goes offline every few seconds. Then it will run fine for a few minutes . I have also noticed it act the similar with Sunba I follow program and Guarding vision live video feed. I am wondering If I have a broke wire in the gimbal because I can see the camera from my computer a when i trigger the PTZ movement and the camera reacts instantly. But the video stalls and get all wonky on the monitor. and BI app on my cell phone acts the same with the Sunba. The real kick is when I use the Guarding vision app on the cell phone the video and PTZ control are smooth as butter. that make no since at all.
I am not sure how far i would have to go back. I've been having this problem about 9 months now. I was hoping updating to this version would fix it . I had a lighting strike came in on the Xfinity cable fried the motherboard and modem and a couple switches and 3 cameras but not the Sunba. I thought I lucked out, I guess not.
Bruce_H
Pulling my weight
Well I am not sure what else to suggest! This goes beyond my current knowledge and experience, still on a life long learning mission!
Look under Blueiris/settings/location then look at what you have under "The weather" the source box is about the only API key input I can think of. If you don't use the weather function, then select "none"
Look here and see what you have selected. Again, if you don't use DIO then uncheck the box.
The box was checked and I unchecked it. I cleared the status box I will give 24hrs and see if it comes back. I wonder if the DIO was messing with the triggers and live view stability.