Empiretech camera Onvif alert types?

[oldspyguy]

Sorry, just getting my test rig setup and still learning. I have a Reolink (uggh) camera that alerts specific types of Onvif triggers to BI (RED) but the Empiretech only sends a motion A alert as shown in the pictures below.


Here
is the BI setting




Should it specify human in the Onvif message?
I have smart motion detection enabled with human and vehicle checked.

I can post the camera setting if that would help
Thank you from a new guy.

 

[oldspyguy]

Oh and no AI running and the IVS seems to be triggering in the pictures below from the sd card.

 

[wittaj]

Sadly no it won't specify what triggered it. One of the few things a Reolink is better at.

You will have to either rename IVS-2 to human or add human to the memo.

If you want to trigger for cars and human, then you need a minimum of two IVS rules - one labeled for car and the other for human.

 

[oldspyguy]

Ah, that makes sense now. So the target filter for each rule is specific, one for car and one for person.
OK, I was planning on using the Onvif triggers for home automation if my brain doesnt melt first.
Thank you....