Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series

[duplo]

It’s .6 not .5 firmware… we had .4
It looks like there were .5 released in march which we never received

.5 have „other” AI target filter (to human/car/animal) for people who want more detection in IVS
There is also high frame support for 1080p

I have the 5r and it bricked my ZE. didnt try to update another cam

General_IPC-HX5XXX-Fourier_MultiLang_PN_Stream4_V3.146.0000000.5.R.260304.bin

 

[tigerwillow1]

The 5459-IL horribly flunked an unplanned human detection test today. Four times, I walked through the edge of the FOV, visible for 2 to 3 seconds. The S3 triggered all 4 times, and the IL missed them all. The applicable tripwire is in the same place on both cameras. This is with the new .6 firmware.

The rule sensitivity is set higher on the IL, 5 vs. 3 on the S3. Global sensitivity is 5 on both. I guess I'll try cranking the IL's sensitivity higher.

 

[duplo]

Is the -IL image quality now better ?

fedex lost mine

 

[bigredfish]

The 5459-IL horribly flunked an unplanned human detection test today. Four times, I walked through the edge of the FOV, visible for 2 to 3 seconds. The S3 triggered all 4 times, and the IL missed them all. The applicable tripwire is in the same place on both cameras. This is with the new .6 firmware.

The rule sensitivity is set higher on the IL, 5 vs. 3 on the S3. Global sensitivity is 5 on both. I guess I'll try cranking the IL's sensitivity higher.

I run sensitivity quite a bit higher. Typically 8 on most of my cameras… same with Global

 

[Chokolinho]

The 5459-IL horribly flunked an unplanned human detection test today. Four times, I walked through the edge of the FOV, visible for 2 to 3 seconds. The S3 triggered all 4 times, and the IL missed them all. The applicable tripwire is in the same place on both cameras. This is with the new .6 firmware.

The rule sensitivity is set higher on the IL, 5 vs. 3 on the S3. Global sensitivity is 5 on both. I guess I'll try cranking the IL's sensitivity higher.

I set the sensitivity to 10 on all my cameras.