Dahua SD49225XA-HNR Auto Tracking Enabled Firmware.

Hi all, been lurking for a while and finally decided to get a PTZ as a test.
Sadly import taxes & customs made it very expensive to buy from Andy, but I found a semi old (manufactured 2021-04) sd49225 on ebay that I'm hoping is possible to enable auto tracking on:

Device Type DH-SD49225XA-HNR
System Version V2.810.0000017.0.R.P9.2520.UN.NR, Build Date: 2020-11-23
WEB Version V3.2.1.984015
ONVIF Version 19.12(V2.8.0.923968)
PTZ Version V2.401.0000000.64.RHNZ_200219_34642

Would anyone be kind enough to share the AT-firmware? All links are dead and haven't been able to find anything useful in other places either.
 
  • Like
Reactions: looney2ns

We have posted it almost the same time.
 
Long time lurker, first time poster!

Can I ask if there are both options (same price) between the previous and S2 version which is the better model especially for auto tracking?

The S2 version does not have autotracking on it as it was the newer chipset and you will probably brick the PTZ if you try to load autotracking on it.

Dahua removed autotracking from this camera not too long after its release, so anything S2 will not take the autotracking firmware.

People with the original chipset though have been able to successfully load an autotracking firmware to it.

So if you want autotracking you need to find an old one, and in particular one that already has autotracking on it. AND THEN DO NOT UPDATE OR YOU WILL LOSE AUTOTRACKING!!!!
 
  • Like
Reactions: Thermometer
Thanks! Other than that does the S2 version have any actual benefits over the previous (auto tracking) version?


Yes, the S2 version does not have autotracking on it as it was the newer chipset and you will probably brick the PTZ if you try to load autotracking on it.

Dahua removed autotracking from this camera not too long after its release, so anything S2 will not take the autotracking firmware.
 
Thanks! Other than that does the S2 version have any actual benefits over the previous (auto tracking) version?

None, it is simply a different chipset due to the chip crisis and not able to get the original one. It may have marginally better image, but no new features, and certainly not enough of a difference that I would get the S2 over an autotracking version.
 
I was super excited since the seller listed the model as HNR but lo and behold it looks like I got the S2 version. Just got it delivered today and the first thing I did was check the version.

Looks like it's not going to be worth trying to do the the upgrade?


None, it is simply a different chipset due to the chip crisis and not able to get the original one. It may have marginally better image, but no new features, and certainly not enough of a difference that I would get the S2 over an autotracking version.
 

Attachments

  • HNR.png
    HNR.png
    12 KB · Views: 40
I was super excited since the seller listed the model as HNR but lo and behold it looks like I got the S2 version. Just got it delivered today and the first thing I did was check the version.

Looks like it's not going to be worth trying to do the the upgrade?

You could be the test for the group and see if you brick it or if it takes it LOL (all at your own risk and expense)
 
dammit all!
 
Lol have we had any reports of the S2s being bricked? If not :rolleyes::banghead:

I don't think so, but Andy himself has stated that it won't work. I'm going to trust his knowledge of the situation given his close working relationship with Dahua. Plus it would be in his best interest if it did work, so the fact he says it won't speaks volumes IMHO.
 
If you contribute 10 genuine posts to the forum I will send you it :)
 
  • Like
Reactions: Grn1z
If you contribute 10 genuine posts to the forum I will send you it :)

Whelp, I'm a freshy Dahua owner trying to figure thisi all out. from what I can tell you seem to be the expert.


PTZ1A225-HNR-XA -- Am I understanding this correctly... The only way you can do auto track is when it' in tour mode and you have configured an IVS rule to trigger autotracking? Am I not supposed to have the live AI tab? It's really hard as a new person to this to begin to understand this. . I have some serious experience with IT and could trade networking\storage\server assistance in exchange for a brain dump or good pointer finger towards a well written page. I've spent the last week sort of cruising these forums and I still feel very confused. I've ended up having to flash my camera twice from a chip clip.. I am glad that they are so easily fixable.

My email is [email protected]. I would say that I could contribute 10 genuine posts to the forum instead of begging my first one... but it would be disingenuous. I would end up just closing my eyes picking a random link and just wordvomiting onto a couple posts. I don't know if I will really be sticking around much. I am planning on replacing the CCD in my system with a MUCH nicer one.. I really only bought it for the chassis, I can promise that in the next ~3 months when I have the money together for an 8mp I will create a post showing step my step pictures of creating a Frankenstein wall-e camera on here. if you could provide some pointers .ect

Thanks,
-Seren