Dahua NVR NEXT GUI

[wittaj]

not a good look @EMPIRETECANDY

Keep in mind Andy is only a re-seller - he knows the shortcomings of the newer stuff and there are many new models he won't even sell.

I am sure if he were in charge of product development, we would get the low light performing cameras we seek and NVRs that aren't quirky.

 

[EMPIRETECANDY]

Yes, I think will need 6-10 upgrade can be better. Those 5442 cams also have problems compare to the 1st generation HDW5231R-ZE. The product team i think have pressure to send the new things out at a time limit.
NVR they haven't update for many years, 2025 they started making very big update to it. So that is why the S1 version i haven't put on the latest GUI 5 firmware on our website.
The NVR S2 use new hardware, so have to use the latest new GUI 5.0.

I will send them the complaint.

 

[Hans*2]

Hallo,

Ik heb een vraag ik heb een DHI-NVR5216-16P-EI

Met het systeem versie V4.000.0000000.0.R, Build Date: 2023-01-31

Kan ik de nieuwe versie DH_NVR5XXX-EI_MultiLang_V5.001.0000000.0.R.251220 er op zetten of moet nog wachten
voor er nog een update komt en dat er de eventuele bugs er uit zijn
of krijg je vastlopers ik hoor graag

Groet Hans

 

[bigredfish]

I can’t be certain but I would not recommend updating to the V5 firmware

 

[Hans*2]

Morgen van uit Nederland
Nou dan wacht ik het wel af en volg het wel en anders leg ik de vraag neer bij de dealer

Groet Hans

 

[tigerwillow1]

1- You used to be able to use a slider to zoom in on the timeline.
That was too easy so they complicated it by making you choose a timeframe. The timeline starts at 24hours naturally so locating the event and then choosing timeframes to get to a point where you can see it and download it takes longer

I've always thought the slider was horrible to use. Hard to imagine making zooming the timeline even more difficult. Mouse wheel for zooming the timeline is the best, as with smartPSS and BI.