Chokolinho
Getting comfortable
We need an EU shop and used cameras at a reasonable price, just like you.
2026 New Release from EmpireTech
- Thread starter EMPIRETECANDY
- Start date
One EU shop somewhere in the middle of Europe supports 27 countries with mostly 1-2 days delivery time and no tax / customs inside.
@EMPIRETECANDY should look at this
@EMPIRETECANDY should look at this
Hey guys
This Wizcolor X camera has been release and ready to ship.
empiretech01.com
This Wizcolor X camera has been release and ready to ship.
EmpireTech IPC-T24PRO-X 1/1.8" CMOS 4MP Full-color Fixed-focal Turret
Estimated delivery in 2 weeks, expedited shipping not supported. High-Quality Imaging with 4 MP Resolution Exceptional Image Quality in Low-Light Environments Deep Learning-Based Human and Vehicle Classification Built-in Dual Mic for Real-Time Audio Security Supports Max. 512G Micro SD card...
empiretech01.com
bigredfish
Known around here
Arjun
IPCT Contributor
Wow, cheaper than the 5442 Warm LED model, you buyin’?Hey guys
This Wizcolor X camera has been release and ready to ship.
EmpireTech IPC-T24PRO-X 1/1.8" CMOS 4MP Full-color Fixed-focal Turret
Estimated delivery in 2 weeks, expedited shipping not supported. High-Quality Imaging with 4 MP Resolution Exceptional Image Quality in Low-Light Environments Deep Learning-Based Human and Vehicle Classification Built-in Dual Mic for Real-Time Audio Security Supports Max. 512G Micro SD card...
Ha ha, yeah. and it still uses the horrible "new" mount. Doesn't Dahua ever listen to its customers? I'll never buy a camera that doesn't use a set screw. I have a new T54IR-AS-S3 sitting in the closet that I haven't ever used because of that mount.I'll bet it will be "bright"
So I understand this looks like Dahua Products, im sure these will be fully compatible with their NVR, ETC ?
F0.8 has to help. Its lens gathers more light to shine on the 1/1.8 sensor. The spec sheet says it uses an M18 lens mount vs. M16 in the 5442s. It could be a game changer, or another flop. Somebody needs to buy one and report. I agree that the mount is crappy. I've avoided them because the fixed focal S3 and -IL work with the old S2 mounts. No mention of animal detection makes it a non-starter for me. The animal detection in the -IL is so bad that maybe Dahua gave up on it.
Looksee
Getting comfortable
Here's hoping that this will prove to be a good contender! We need one!
edit: Sorry, overreacted. Read through too fast and goofed.
Last edited:
aha, because You haven't get report lots of guys asking me for the losing lock screws on the motorized lens ones, some people use too big power make the screws stripped, and have to cut the housing and replace the housing.
I checked the 24pro new one is a little bigger than the 54ir ones, but the ball part on the 24 one is bit tighter than the 54ir ones. They make some improvement on it compare to those old ones.
Arjun
IPCT Contributor
Andy, when are you sending a sample to a user on this forum?
Also, when are you going be stocking spare parts to keep our 5442 (54IR) cameras lasting longer? i.e. housing, base plates, hardware such as screws, etc
@EMPIRETECANDY
Arjun
IPCT Contributor
Also, the included hardware in the PFA6330X junction box does not secure the baseplates of all the Dahua turret cameras. I've had to takes the hex screws out of a PFA130E mount (which are smaller length) to make it work on the PFA6330X. The included hex machine screws in the PFA6440X are too long and makes the baseplate of the camera very loose. This is unacceptable.