Search results

  1. M

    AI for animal detection in older version of BI

    Thanks for that info.....yeah I am contemplating a swap to a newer box....have to be in the right frame of mind to start down that road...lol After my last post I basically set the detection to the most sensitive setting last evening and this morning found that I now am getting yellow squares...
  2. M

    AI for animal detection in older version of BI

    I thought that too at first but I often get alerts from a clump of leaves on the tree moving (albeit in the daylight) where the leaves dont seem that contrasty to me.... I figured the glowing eyeballs would have triggered it since bugs in the IR do....?
  3. M

    AI for animal detection in older version of BI

    Hi folks. I have had BI 5.4.4.2 humming along on my (old) PC for a few years now....I am not a believer in "upgrading" versions just for upgrade sake.... Plus my old PC may not be able to handle the newest version. That all said --- I have been tinkering with the detection/trigger settings a...
  4. M

    Setting error alerts in BI 5.4.4.2

    Thanks! That looks like it! I have it set to "replace email body with error" but it doesnt...just says error....so its a wasted email.... Appreciate the help!
  5. M

    Setting error alerts in BI 5.4.4.2

    A few years back I set up "alerts" for my cameras -- both for triggered alerts and error alerts. Thing is, the error alerts give me ZERO info as to what the error is, so I would either like to fix that (so they tell me what the error actually is, so its useful) or delete the error alerts so I do...
  6. M

    AXIS P3245-LV and Blue Iris?

    I picked up an ANPVIX PTZ 8mp 4k camera off amazon.....so far pretty nice, and connected right into BI....so I am not an idiot....LOL (although I found I cannot use the full resolution of the camera yet --- I think thats my PC that is the bottleneck.... Still gonna keep trying with the AXIS...
  7. M

    AXIS P3245-LV and Blue Iris?

    One thing I noticed when I just tried this again, it changed the aspect ration of the camera from 4:3 to 16:9 but still no signal. And,m not sure if I asked this before but ---- is it odd that the "axis no signal" appears "twice"?
  8. M

    AXIS P3245-LV and Blue Iris?

    Just taking a break from it.......lol
  9. M

    AXIS P3245-LV and Blue Iris?

    Yeah Ive done the factory reset a few/several times with the different iterations in this thread... Im about to chuck it. LOL
  10. M

    AXIS P3245-LV and Blue Iris?

    No change.....what causes the 401 message is when the port is anything but 80....no message if I change it to that......
  11. M

    AXIS P3245-LV and Blue Iris?

    I have been trying this for a couple hours now......still no joy, though now in the BI window for the camera it says , along with NO SIGNAL, it also says "HTTP 401 unauthorized"
  12. M

    AXIS P3245-LV and Blue Iris?

    If I try and add a new camera and do not enter the IP address of this axis camera, and just try to "find/inspect", BI does not see anything on my network......is that odd? If I use the cameras IP address it finds it and configures for it as generic ONVIF but doesnt show the feed in BI....... WTH
  13. M

    AXIS P3245-LV and Blue Iris?

    Just tried it......nope. I even did yet another factory reset.... I really need an "ah HAH!" moment.....
  14. M

    AXIS P3245-LV and Blue Iris?

    Just tried that, no good.... I am lost. LOL . I even tried several different cameras including a cat 6.....no joy.
  15. M

    AXIS P3245-LV and Blue Iris?

    Yes, the logon name is root for both and the same password is used.
  16. M

    AXIS P3245-LV and Blue Iris?

    Tried changing the IP address to a lower last number, which worked for a previous camera I had tested....still no good.
  17. M

    AXIS P3245-LV and Blue Iris?

    Yeah...about a dozen times....... its gotta be something stupid, but I just cant find it. The camera is "found" in BI when I provide the IP ..... and the stream seems to be streaming given the data changes on the one screen -- given a low data rate --.....but the BI interface shows "no signal".
  18. M

    AXIS P3245-LV and Blue Iris?

    Does the "HTTP UNAUTHORIZED " message mean anything in this situation? When I go into teh camera software and turn off the "bonjour" and "upnp" options the "unauthorized" goes away but still have the "no signal" message
  19. M

    AXIS P3245-LV and Blue Iris?

    Thanks. Tried that and several iterations of deleting parts of it......still no good. :(
  20. M

    AXIS P3245-LV and Blue Iris?

    Noticed that the main stream seems to have activity in the camera page.......but not in the monitoring window in BI
  21. M

    AXIS P3245-LV and Blue Iris?

    Plays the stream just fine (thanks for this, I learned something new today...been using VLC for eons.....didnt know it could play streams that way)
  22. M

    AXIS P3245-LV and Blue Iris?

    I just updated the firmware for the camera --- first to 10.12.300 then to 11.11.181......no difference to BI. What the heck am I missing????
  23. M

    AXIS P3245-LV and Blue Iris?

    SO these are the settings that "inspect" populates....I also tried changing the "onvif source" at the bottom to videosrc_cam0 for main and videosrc_cfg_cam0 since that is how my other cameras show up (not AXIS cams).....also tried changing the "main profile" to "/live/main" and "sub profile" to...
  24. M

    AXIS P3245-LV and Blue Iris?

    Ok, I was able to get the camera reset again and now it is again showing up in BI at the network configure link.....I set up a second admin account in the camera for onvif and now the camera is at least showing ONVIF when I "inspect"....but was still showing an "unauthorized-check user password"...
  25. M

    AXIS P3245-LV and Blue Iris?

    Yep I did both of those things and had no luck. Then I tinkered too far--- changed some setting in the advanced settings and now cant even get as far as I had after doing multiple factory resets..... I am able to reset it, and then change the UN/PW as required.....and change the IP address to...
  26. M

    AXIS P3245-LV and Blue Iris?

    Hi folks I am tinkering with an AXIS P3245LV --- The PC sees it.....I am in the cameras interface on the PC via blueIris....But the console wont see the camera. Is there some magic incantation I am missing? I have tried going Generic ONVIF, as well as the "AXIS P series"......and just cant...
  27. M

    Issues with OpenVPN out of the blue

    Hi folks. Y'all helped me set up my home cameras a while back with BlueIris and they have been running very solidly for some time. BluieIris is awesome! But lately, having an issue with "peer certificate verification failure" in Open VPN when I go to use my android phone to access the VPN...
  28. M

    How to improve scrub action?

    Well, not much running aside from BI and Avast virus protection..... My system is pretty old.....no doubt the main issue.
  29. M

    IP Camera offline after powering down

    I just looked at the NIC for my cameras --- already set to manual
  30. M

    IP Camera offline after powering down

    "Then go to the camera Network settings and change the camera IP address to the range of your system and hit save. " Pretty sure that is what I had done early on....WITAJ had walked me through step by step as well as did others....I remeber those screens when setting up the two NIC cards....and...
Top Bottom