AXIS P3245-LV and Blue Iris?

moparcruiser said:
Just tried that, no good....

I am lost. LOL . I even tried several different cameras including a cat 6.....no joy.
Click to expand...
Try checking "Decoder compatibility mode".
 
TonyR said:
Try checking "Decoder compatibility mode".
Click to expand...
Just tried it......nope.

I even did yet another factory reset....

I really need an "ah HAH!" moment.....
 
If I try and add a new camera and do not enter the IP address of this axis camera, and just try to "find/inspect", BI does not see anything on my network......is that odd?

If I use the cameras IP address it finds it and configures for it as generic ONVIF but doesnt show the feed in BI.......

WTH
 
moparcruiser said:
I really need an "ah HAH!" moment.....
Click to expand...

Have you seen this?
S

Thread 'Axis P3245-LVE substream configuration'

I had an application where I had to add 12 Axis cameras to an existing install, and I couldn't find documentation on the parameters for the substreams anywhere. I finally got it figured out, and I thought I'd post what worked for me. These settings worked for the P3245-LVE and the P3016. If anybody knows a better way or sees an error, please feel free to point me in a better direction. So, this is what I did:

First, set up the stream profiles in Stream|Stream Profiles. I added two streams, and named them 0 and 1, respectively. I only changed the resolution and frame rate, though...
  • Like
 
  • Like
  • Sad
Reactions: moparcruiser and TonyR
iwanttosee said:
Have you seen this?
S

Thread 'Axis P3245-LVE substream configuration'

I had an application where I had to add 12 Axis cameras to an existing install, and I couldn't find documentation on the parameters for the substreams anywhere. I finally got it figured out, and I thought I'd post what worked for me. These settings worked for the P3245-LVE and the P3016. If anybody knows a better way or sees an error, please feel free to point me in a better direction. So, this is what I did:

First, set up the stream profiles in Stream|Stream Profiles. I added two streams, and named them 0 and 1, respectively. I only changed the resolution and frame rate, though...
  • Like
Click to expand...
I think I can hear @moparcruiser saying "ah HA"!

Thanks for posting this. Heck, I was in that post also, 3-1/2 years ago! :cool:
 
iwanttosee said:
Have you seen this?
S

Thread 'Axis P3245-LVE substream configuration'

I had an application where I had to add 12 Axis cameras to an existing install, and I couldn't find documentation on the parameters for the substreams anywhere. I finally got it figured out, and I thought I'd post what worked for me. These settings worked for the P3245-LVE and the P3016. If anybody knows a better way or sees an error, please feel free to point me in a better direction. So, this is what I did:

First, set up the stream profiles in Stream|Stream Profiles. I added two streams, and named them 0 and 1, respectively. I only changed the resolution and frame rate, though...
  • Like
Click to expand...
I have been trying this for a couple hours now......still no joy, though now in the BI window for the camera it says , along with NO SIGNAL, it also says "HTTP 401 unauthorized"
 
  • Sad
Reactions: TonyR
"unauthorized" to me points to username/password. Change to a different user/password on the camera and try again.
 
iwanttosee said:
"unauthorized" to me points to username/password. Change to a different user/password on the camera and try again.
Click to expand...
No change.....what causes the 401 message is when the port is anything but 80....no message if I change it to that......
 
moparcruiser said:
No change.....what causes the 401 message is when the port is anything but 80....no message if I change it to that......
Click to expand...
You have an interesting issue indeed. I'd factory default the camera, leave everything default and just change the password and try to add then see.
 
iwanttosee said:
You have an interesting issue indeed. I'd factory default the camera, leave everything default and just change the password and try to add then see.
Click to expand...
Yeah Ive done the factory reset a few/several times with the different iterations in this thread... Im about to chuck it. LOL
 
TonyR said:
One more suggestion......

If all else fails and since you said in your post #9 that my suggested URL path works with VLC, under "Make" of "Generic/ONVIF" try setting the "model" in the drop-down to "VLC-compatible RTSP" as below:


View attachment 233851
Click to expand...
One thing I noticed when I just tried this again, it changed the aspect ration of the camera from 4:3 to 16:9 but still no signal.

And,m not sure if I asked this before but ---- is it odd that the "axis no signal" appears "twice"?
 
  • Like
Reactions: TonyR
I picked up an ANPVIX PTZ 8mp 4k camera off amazon.....so far pretty nice, and connected right into BI....so I am not an idiot....LOL

(although I found I cannot use the full resolution of the camera yet --- I think thats my PC that is the bottleneck....

Still gonna keep trying with the AXIS --- just not sure what to try next other than reaching out to AXIS...
 
Last edited:
  • Like
Reactions: TonyR
You must log in or register to reply here.
Top Bottom