Search results

  1. CrazyAsYou

    What is causing this issue?

    TCP is almost pointless for Video streaming, you're better off with UDP.
  2. CrazyAsYou

    Optimal camera BI setting

    Sorry to say this but in the early days I was also wowed by cheap high MP Reolink cams (like so many are) and then I found they're near unless at night with even slow moving objects. I soon learnt that what you want/need is cams with only 2MP with a decent sensor running 15 FPS, 15 key frames...
  3. CrazyAsYou

    ONVIF -vs- RTSP -vs- ? for BI and Dahua (Andy's) cameras?

    All of my Dahua cams (from Andy) are set like this, and I've never had any issues.
  4. CrazyAsYou

    Running Blue Iris 24/7 on old hardware? You might be paying more than you think…

    That's a good shout on the PoE switch side of things, yes big old 24-48port enterprise Cisco switches can be had for cheap, but they consume loads of power. I ran a Cisco 3750G for a few years and swapped it for a cheap 8port TP link and dropped a few hundred watts. FYI - If anyone is...
  5. CrazyAsYou

    Running Blue Iris 24/7 on old hardware? You might be paying more than you think…

    Well for me, I use my BI system also as my main PC (mainly a little office work, web browsing and watching YouTube etc) I went with an Intel Ultra 5 245KF paired with a RTX 4060 - When I'm not using the PC and it's only performing BI and AI tasks it sits at about 45-52watts, that's with 8...
  6. CrazyAsYou

    Running Blue Iris 24/7 on old hardware? You might be paying more than you think…

    I would like to start by calling out that although I wrote most of this post manually it was a little messy and all over the place, so I use ChatGPT to tidy it up and make it a little more professional. I’ve been seeing a lot of posts lately where people are running or asking about Blue Iris +...
  7. CrazyAsYou

    BI Built-in AI image resolution

    Can anyone tell me what the resolution is for image(s) that Blue Iris will pass to its internal AI - I only use sub streams from my cams for motion and AI and would like to align the sub streams source feed from the camera as close as is possible to what BI will use for internal AI processing. I...
  8. CrazyAsYou

    Trying SSD on BI

    yep and I've used many of them over the years, here are a few Samsung Magician Software Download | Consumer Storage | Samsung Semiconductor Global << Samsung Drives SanDisk SSDs, Memory Cards, and Flash Drives for Your Digital Life | Sandisk << San disk drives and also covers Western...
  9. CrazyAsYou

    6.0.3.6 New Logfile Entries

    So just to confirm, although you/we add the parent install folder "C:\Program Files\Blue Iris" we also need to add the actual executable/process as well "C:\Program Files\Blue Iris\BlueIris.exe" ? - This seems odd to me, is it a bug in how Windows defender applies exclusions?
  10. CrazyAsYou

    6.0.3.1 - Broke my webserver

    Neither of them are open source, there is price for both if you have more users/devices than the free tier allows, you're dependent on a 3rd party service, all users require another app installing on all devices they use and for them to then run/connect said app and maybe have some level of...
  11. CrazyAsYou

    6.0.3.1 - Broke my webserver

    Thanks for confirming, I use nginx as a reverse proxy to remotely access BI with https, I'll hold of updating.
  12. CrazyAsYou

    Periodic Scan

    I've not had another object(car) outside the motion zone alert overnight, but I've still had a passing car's headlights trigger motion and then my car listed as a static object trigger my alert.
  13. CrazyAsYou

    Periodic Scan

    installed it about 30mins ago, so far so good for the alert triggers.
  14. CrazyAsYou

    Periodic Scan

    I've had this version installed since this morning and think I'll also have to roll back, I've got a very similar issue in that all motion triggers are then triggering my "Alert" >> "On alert" actions even when AI lists them as "Nothing Found" - I have a number of pushover, MQTT and other alert...
  15. CrazyAsYou

    Periodic Scan

    Let's see how this plays out
  16. CrazyAsYou

    BI 6.0.2.7 - very odd alert behavior

    Very strange that a reboot has any effect when the update restarts the whole BI service, and you clearly see all BI processes briefly disappear and all the RAM and GPU ram freed up. You'd assume everything would be flushed, I wonder if there is something to this, maybe an odd temp file or...
  17. CrazyAsYou

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    It's not a privacy mask, it's the area that falls outside of Zone A (not in a zone and should not be considered for motion or AI) I've had this config for years.
  18. CrazyAsYou

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Can anyone explain this to me; 1, In the black masked out area is a road. Why is a car passing on the road in a masked out area getting detected by AI? 2, My car is clearly getting picked up as a static object but when the cat triggered motion BI flagged the car.
  19. CrazyAsYou

    Trying SSD on BI

    Worth adding to the above, most SSD disks come with details about there expected wear given X amount TB of disk writes per year, the larger the SSD disk and lower the writes the longer the SSD will last. If you know your daily/weekly/monthly BI recording/disk write sizes, you can easily...
  20. CrazyAsYou

    Trying SSD on BI

    FYI - I ran SATA 250GB Samsung SSD (860 EVO) as my main BI recordings new folder with 6 cams (~40mbits/sec) for about 6 months (on 90% full BI moved recordings a spinning rust 4TB drive) over the ~6-month period of 24/7 recording the drive went from 3% wear to 35% wear (as shown by the disks...
  21. CrazyAsYou

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    I've got the same issue (parked car) identified as moving if something else triggers motion in the scene - whatever Ken has done recently with static object he seems to be making it worst not better, I've never had issues in the past unless there was a significant scene factor such as heavy...
  22. CrazyAsYou

    Transfer BI to new system

    Ok so new system is built and BI transferred over. Here is that I did, and it worked perfectly (every single BI setting for AI and cams carried over along with all alerts, clips and DB) On the old system, I clicked the "Copy button for support" under the help section and made a note of my...
  23. CrazyAsYou

    Transfer BI to new system

    So the import of the backup.reg won't carry over the licence, and I'll need to use my original key from my purchase email?
  24. CrazyAsYou

    Transfer BI to new system

    In a few days time I'm replacing my current BI system, what is the correct and easiest process to do this? I was thinking; Install a fresh copy of BI on the new system. Stop all the BI services / processes on the old and new system. Copy over the complete directory "C:\BlueIris\" from the old...
  25. CrazyAsYou

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Check your coco.names file in the AI Models folder, the first/early releases had everything enabled but later releases disabled most of the junk not needed for CCTV systems. FYI a - (hyphen) before the object disables it.
  26. CrazyAsYou

    Things that Blue Iris and AI hates - Just a little fun

    Thought I would start a fun post for people to list the things that their BI and AI system hates. I'll make a start, my list is; Spiders and their Webs blowing in the wind. Heavy Rain. Christmas lights.
  27. CrazyAsYou

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    When comparing YOLOv10 vs. YOLOv8 for CCTV footage, the choice depends on whether your priority is raw speed and efficiency (YOLOv10) or high detection accuracy, particularly for small or distant objects (YOLOv8). YOLOv10 is faster and more efficient due to its NMS-free (Non-Maximum...
  28. CrazyAsYou

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    As of today the following models are part of https://download.blueirissoftware.com/ai/AImodelpack.exe
  29. CrazyAsYou

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    I don't run/execute those ALmodelpacks, I just open them in Winrar and manually extract the models I want. I have a total of three files in my models folder, coco.names, bi-general-v5.onnx and yolov8m.onnx - I do have the advantage of not needing faces or licence plates on my BI setup :)
  30. CrazyAsYou

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Looks perfectly accurate to me, I don't see your issue :lmao::rofl::lmao:
Top Bottom