New profile posts

Listening

Hello Sir,

I need your technical assistance regarding a Hikvision IP Camera with a firmware/language issue. Below are the complete details:

Camera Model: DS-2CD26E6CMDV3-IZS
Serial Number: DS-2CD26E6CMDV3-IZS20210201AACHF38451899
Current Firmware: V5.6.6 build 220307
Encoding Version: V7.3 build 220307
Firmware Version Property: B-R-G1-0
Web Version: V4.0.1

Problem​

The camera is currently operating with a Chinese firmware/interface, and I need to change it to English/International firmware.

The camera itself is working and I can access its web interface normally. I have also installed the required Hikvision web component.

I tried upgrading the camera using different digicap.dav firmware files, but the firmware upgrade does not complete successfully. The upgrade either fails or remains stuck, so I do not want to continue testing random firmware because there is a risk of bricking the camera.

Assistance Required​

Could you please help me determine:

1. The exact compatible English/International firmware for this specific camera and hardware revision.
2. Whether this Chinese-region camera can safely be converted to an English/International region.
3. Whether firmware from another DS-2CD26E6CMDV3-IZS with the same hardware revision can be used.
4. If normal web/SADP/TFTP firmware upgrade is not possible, whether the camera can be recovered/programmed directly through its SPI NOR, NAND, or eMMC flash memory using a hardware programmer.
5. If direct programming is possible, which programmer and procedure should be used.
6. Whether a full flash dump from an identical working camera can be written to this camera.
7. Which partitions contain the bootloader, firmware, region/language information, serial number, MAC address, and calibration data, so that device-specific information is not accidentally overwritten.
8. If you have the correct digicap.dav, recovery firmware, full flash dump, or service/recovery procedure for this exact model, please share it with me.

My main objective is simply to make this camera operate normally with an English interface without damaging or permanently bricking it.

I can provide PCB photos, memory-chip markings, current firmware files, configuration information, screenshots, or a flash dump if required.

Thank you.

Hi Guys,

Does Anyone Has A Downgrader tool For My DS-7816NB-K2 Nvr? It Is A Chinese Nvr.

FIRMWARE VERSION: V4.30.097 build 240401. MUST BE DOWNGRADED.
Problems:
1. Not Recording Properly
2. It Stops Recording Or The Recording Status Icon Suddenly Disappeared
3. Hard To Fix The Network Problem
4. NonStop Beeping Cant Fix It

DM Me, I Appreciate It.

Hi, I saw you're good at Annke cameras. Could you tell me how to put the Annke firmware back inside?

H Andy, the IPC-Color4K-T-S2 can ship to Australia? pls DM me

هل اجد لها فرموير او رمز talent

Hi Andy,

I have the IPC-Color4K-X / DH-IPC-HFW5849T1-ASE-LED. When updating the firmware, I first flashed the general IPC file and then the firmware file. When I try to flash the firmware file it doesn't work and just fails. I've tried updating it through the web app, and also the configtool. Any idea what might be wrong?

Need Help With Lorex Camera System Set up

Hi Andy, I was looking to get an NVR from your website . Do you offer shipping to Singapore?

My Security Camera Journey – Learning That Prevention Is Better Than Reaction​

This was my first real experience understanding how much of a difference security cameras can make for a business.

At first, I thought CCTV was only useful after something had already happened. I assumed it was just about recording video in case of theft or vandalism. But once I started learning more, I realized it's much more than that.

The first installation taught me that camera placement matters just as much as the cameras themselves. Blind spots can leave important areas unprotected, while the right coverage can improve security, employee safety, and day-to-day operations.

Over time, I learned that security cameras do much more than record footage. They help deter unwanted activity, provide valuable evidence when needed, monitor deliveries, improve workplace awareness, and give business owners greater confidence when they're away from their property.

The biggest lessons I learned were surprisingly simple:

• Plan camera locations before installation instead of adding cameras later.
• Choose image quality that captures important details, not just movement.
• Regularly check recordings and system health to ensure everything is working properly.
• Secure remote access so you can monitor your property from anywhere.
• Maintain your system with software updates and routine inspections.

A well-designed security camera system isn't just another business expense—it's an investment in protecting people, property, and peace of mind.

Now I see security cameras as more than surveillance tools. They're an essential part of running a safer, smarter, and more secure business.

The footage isn't just video—it tells the story of what matters most.

Beer, beer and beers.....

Hi Andy,

I purchased some IPC-T54IR-ZEB-S3 cameras in March 2024 from you. I wanted to know if there is any updated firmware for these cameras that I should consider.

Also I have a N54B3P NVR that is running V4.002.0000000.5.R (7/29/22). Is there an update for this? I looked at your website but I really don't understand what would be correct and whether I should take the chance of updating.

Again, thanks for your time helping me. I really appreciate it as I really don't know what I'm doing!!!

Thanks,

Faye

Hi, I'd like to connect with you and have a chat.

How to fix micro SD card in dahua intercom KTP03

Ola minha camera atualizou e agora nao aparerece imagem como corrijo isso?

Hello Andy, Looking to buy a Dahua NVR5216-16P-EI2. Message me with your price and availability. Thanks, Jim

Besoin d'une image flash SPI pour Vivotek IP8332 Caméra hors service (LED rouge fixe)>Processeur : TMS320 DM365ZCE30Mémoire flash SPI : ST1151A (2 Mo)Besoin du fichier binaire du chargeur de démarrage ou d'une image flash

---

​

   


I just purchased a new system from Empire tech ... My existing 5 yr old lorex is giving me too many false alarms ... hope this works better .. it's mostly from cloudy windy days the shadows the camera sees... today it work well it's cloudy ...

Is there any way to look at my whole screen - there is a ad that takes up about a 1/4 of the bottom of my screen (with a triangle and 3 dots)