bigredfish
Known around here
The only time I see these be wrong like his is when they are manually added vs allowing the NVR and camera to negotiate it autiomatically
Unable to log in to one of my Dahua cameras via the Dahua NVR interface
- Thread starter mat-with-one-t
- Start date
bigredfish
Known around here
Unplug a cam
Delete the entry
Plug back in and don’t touch anything. Wait
Then try using the IE button (one single left click on the icon)
And tell us if it opens? And what the port says
You could also try my 1st suggestion and factory reset it while connected using the black button inside the sd card slot
The trick on both is to not touch anything do not manual add, let it be and do what its gonna do by itself
Delete the entry
Plug back in and don’t touch anything. Wait
Then try using the IE button (one single left click on the icon)
And tell us if it opens? And what the port says
You could also try my 1st suggestion and factory reset it while connected using the black button inside the sd card slot
The trick on both is to not touch anything do not manual add, let it be and do what its gonna do by itself
Yes it does, the thing is the port numbers have always been 37777.
bigredfish,
That worked for that camera, and it does say port19 now. So weird it just started this crap out of nowhere. The camera did not come back online by itself I had to hit refresh. I suppose I need to do all this way now.
That worked for that camera, and it does say port19 now. So weird it just started this crap out of nowhere. The camera did not come back online by itself I had to hit refresh. I suppose I need to do all this way now.
Did the same with all and seems to be working.
Thank you so much for your help and time!
Thank you so much for your help and time!
