Unable to Connect displayed after logon to the webclient

Adeyinka said:
They are Reolink RLC-410 4k cameras, 24fps continuous recording to a 32TB DAS. I will check out the WIKI.
Click to expand...
Reolink is garbage and has known issues with blue iris as the iframe interval cannot be adjusted.. they are a lying spamming company.
It's 4mp not 4k.
 
Yes I meant 4K.
That sounds a little technical for me but I have not had any issues with them. I find most other camera require regular reboot but the reolinks have not been reboot in over a year.

I have found BI to be head strong with frame rates. I have to constantly change it back to 24fps. For some unknown reason it changes to between 27fps and 33fps. This happens with a another installation I have set to 15fps. I know this has happen when the CPU usage jumps up to over 90%.
 
Adeyinka said:
Yes I meant 4K.
That sounds a little technical for me but I have not had any issues with them. I find most other camera require regular reboot but the reolinks have not been reboot in over a year.

I have found BI to be head strong with frame rates. I have to constantly change it back to 24fps. For some unknown reason it changes to between 27fps and 33fps. This happens with a another installation I have set to 15fps. I know this has happen when the CPU usage jumps up to over 90%.
Click to expand...
The reolink 410 is a 4mp or 5mp camera depending on version NOT a 4k, so if you meant 4k you are wrong.
Most other cameras do not require a regular reboot, not sure where you got that nonsense from. Its almost certain that your reolink cameras have rebooted in the last year unless you live someplace that has no power outages. Have you even check to see if the camera rebooted on its own? Do you even know how to check that? Once again reolink is trash and the fact that you settled on it to install for others speaks volumes.
BI is not "headstrong" on frame rates. You simply dont know how BI works. You must change the frame rates in the CAMERA NOT BI. The BI frame rate setting auto adjusts as explained in release notes. Honestly, you should not be installing cameras or BI for anyone.
 
Well. The installation requires 99.9999% SLA so all the CCTV equipment sits on 1 x 15kva and 2 x 6kvA UPS's.

You are obviously more technical than I am so I will leave the Reolink topic.

See below for another installation that isn't using Reolink and has the same problem.

Blueiris.PNG
 
I don't know why I keep typing 4K... I meant 4MP on both occasions. My head simply keeps going for 4K because I just bought a 4K TV for home use. :)
 
Adeyinka said:
Well. The installation requires 99.9999% SLA so all the CCTV equipment sits on 1 x 15kva and 2 x 6kvA UPS's.

You are obviously more technical than I am so I will leave the Reolink topic.

See below for another installation that isn't using Reolink and has the same problem.

View attachment 31557
Click to expand...
you dont have a problem. The frame rate will remain as set in the camera as you can see in your blue iris status page unless the CAMERA is sending more.
 
Okay I solved the problem with the Floureon camera, the ONVIF 'NVC Type' was set to UNiview. I changed it to Normal and it has been online streaming for over 1hr continuously. :)
 
You must log in or register to reply here.
Top Bottom