Snapshots Not Being Sent with Dahua WizMind NVR5216-16P-I

[Longview]

I am certain it is my error but can't find it? It records (General, Motion and Alarm) all Tripwires. I can view the snapshots in the AI search but they are not sent to my E-Mail?
The other cameras send but not this one. Does anyone have a checklist for me to compare to my configuration to see what is missing? I have the snapshot times established for 24 Hours, the drives configure for recording 24 hours, I can successfully test the email send. Don't nkw why this one camera fails?

 

[bigredfish]

What model camera?

 

[Longview]

DH-SD49225XA-HNR

Thanks Big Red

 

[bigredfish]

I don't have that exact camera but you should have two settings (assuming its recording snapshots under the main recording schedule/snapshot)

• on the camera individual IVS rule their is a snapshot box to tick (as well as the "Record" and "Snapshot" event linkage
• on the NVR on email setup there's an "attachment" box to tick

 

[Longview]

Thanks Red, I will check it out.

 

[Longview]

BIGRED: Your the best! That nudge got me searching every setting in the NVR. After 30 Minutes I found a setting labeled MORE!

When clicking on it, showed alerts, email and several more, the E-Mail was NOT CHECKED! It is working now. Thanks a million...

 

[bigredfish]

Duh, the popup on the IVS rule on the NVR.

I have missed that more times than I care to admit!

Glad you got it

 

[bigredfish]

FWIW that should synch from the camera but many times doesn’t. It’s a bug IMHO

 

[Longview]

Thanks, my camera is eight years old. I have a new one from Andy but installers want too much to replace it. ($400 for a manlift plus labor fees).

Might try it this summer.

 

[bigredfish]

Thanks, my camera is eight years old. I have a new one from Andy but installers want too much to replace it. ($400 for a manlift plus labor fees).

Might try it this summer.

I mean the NVR should see it and synch. I’ve had it do that on a number of cameras

 

[Longview]

Maybe you have seen this? When I select (AI Manage by Camera) it defaults to (AI Manage By NVR). Not a dealbreaker but a nuisance. I can no longer login to the Camera Locally so I need to replace it, not worth the cost of resetting such an old device.