I just noticed that my Starlight IPC-HFW4239T-ASE has stopped triggering. It won't even trigger with the "trigger now" command. I bought it in mid-January from Andy. I tried cycling power. Any other ideas?
Sick Starlight?
- Thread starter davej
- Start date
fenderman
Staff member
- Mar 9, 2014
- 36,891
- 21,418
Probably considering that it sounds like you have blue iris doing the motion detection and you are trying to trigger it with blue iris. Blue iris is getting the camera feed there's nothing wrong with the camera. Delete the camera and add it back.
For the most part, the camera just provides a video stream. The camera has full control over this stream (resolution, frame rate, i-frame interval, video codec, whether or not audio is included, etc). In most situations Blue Iris does not use the camera's built-in motion detection or AI features.
So when you have a problem with recording triggers not working, it is almost certainly a problem with the Blue Iris config.
So when you have a problem with recording triggers not working, it is almost certainly a problem with the Blue Iris config.
fenderman
Staff member
- Mar 9, 2014
- 36,891
- 21,418
As noted, unless you set blue iris to use the cameras motion detection which you have not, it wont work.
Oh hell, my profile/schedule for this camera was screwed up. User error.
Last edited: