Reolink Poe doorbell vlan firewall setup

[Andy M]

Hi I am hoping someone can help I have a reolink POE doorbell, Dahua NVR and some Dahua IP camera's. I am setting up some vlans to create a more secure setup on my Synology router. I have the onvif stream setup to constantly stream from my reolink to my NVR as I have never had much love for motion recording. there's always a bit before or after that you need.


Anyway I digress. I have the doorbell and the NVR on Two indiviual lan's the NVR lan has internet blocked and the Reolink has internet access as I use the reolink app (the just isn't a good alternative- home assistant just doesn't cut it for 2 way audio . I am struggling to setup the firewall rule that allows the doorbell to stream to the NVR across lans. every time I enable the last kill everything else rule on the firewall it blocks the stream to the NVR.

the firewall allow rule from the doorbell to the NVR on port 8000. I cant work out what I need to change. any help or insite would be great.

thanks in advance

 

[alastairstevenson]

the doorbell to stream to the NVR across lans.

I'm guessing that for the video stream, port 554 would be needed.
What guided the choice for port 8000 - is this the ONVIF command and control port as used by the doorbell? Have you custom-defined this in the NVR?
It's what a Hikvision camera would use for Hikvision's command and control dialogues with an NVR.

every time I enable the last kill everything else rule on the firewall it blocks the stream to the NVR.

Does this generate a firewall deny log entry that would provide any clues?