With both sensors way too small, I would guess it will be like many such cameras:
Great for overview and maybe tracking in bright daytime sunlight, and basically suck at night/low light. Though if you're willing to run the white light illuminators all night it would likely improve the image out to 60-80ft
For what 2 IPs?
Even if camera have 2 separate SOC's (processors) for each channel due power processing reasons (like in Hubble series), it simply works as one camera with one IP and 2 channels (like in thermal cams)...
IVS in linkage mode is shared, PTZ reacts at objects detected by panorama...
No two.. panorama (single channel like in normal 5849-A180) and PTZ...
panorama channel have also that strange Dahua specific 180 degree resolution / ratio and with horizontal compression...
the only sign that it have 2 separate SOCs / processors are separate RAM/ROM sizes for each channel.
Thanks, how would you go about adjusting the position of the PTZ then (hardware wise)? Would it just mount the same way a PTZ would and then I would manually set the home position in the web interface?
Also, can this unit work in both Independent and Linkage mode?
Is there a model like this with a better sensor? I really like the 1 camera option but would like 1/8 or better if possible. If not can this model be setup with just a SD Card with alerts coming to phone?