please help Dahua 5 mp PTZ ip cam
- Thread starter mocckba
- Start date
Broachoski
Getting comfortable
From the photo, you should be able to use an ohm meter to check what pins correspond to each wire with the little bit of wiring remaining on that female RJ45 plug.
I know that can find. But…We made a mistake, we wanted to disassemble the plug, but we damaged it in such a way that this option will not help. I didn't have a voltmeter with me
Lots of similar threads. Here is one.
ipcamtalk.com
I need a Ethernet/power cable pigtail...
I need a Ethernet/power cable pigtail for an EmpireTech 4MP Ultra Low Light Turret IP Camera. Is there anywhere to buy one? I'm not having any luck.
Not helped. I have not purple wire. I found this option. The camera works but there is no internet signal, the second light blinks yellow, but does not light up in the poe switchLots of similar threads. Here is one.
I need a Ethernet/power cable pigtail...
I need a Ethernet/power cable pigtail for an EmpireTech 4MP Ultra Low Light Turret IP Camera. Is there anywhere to buy one? I'm not having any luck.
Attachments
guykuo
Getting comfortable
There is almost always a way to ghetto fashion a continuity tester. A flashlight with its end cap off and a couple wires bits will do the trick.
So, will a battery, bits of wire and your tongue. Not for live circuits - of course, but will work in a pinch.
I’ll do that next time but this is the first time in 12 years that the cable has been damaged. in this case I need to know the wire colors, 2 minutes to do