Overview status question

1

105437

BIT Beta Team
Jun 8, 2015
2,324
1,142
None of my cameras are using Faces recognition. Why does it show up in my Overview?

1787607307943.png
 
The Faces and ALPR always show, I think that the logic to only show what is being used was not put into the program, if it is really bugging you then send a message to support and ask if it can be removed if not being used!
 
  • Like
Reactions: 105437
Here is what mine is showing. I have changed many camera settings, and goofed around with yolo versions etc...So I have no idea why it is displaying in this manner.
1787637888466.png
 
  • Like
Reactions: 105437
Yeah, maybe just ignore it.
BI will drive me batty if get too obsessed/ involved in all it's quirky things.
It could be a secret test installed by the programmer checking for stage 4 Obsessive Compulsive Disorder.
Just talking about it could mean one's paranoia scale has gone to Condition Orange.
So i must depart this thread and unfollow it to avoid detection.
 
  • Like
Reactions: 105437 and Tinman
I emailed Ken about this one. Task Manager shows BI using the GPU at 73.7%, Overview tab shows only 1%.

1787686015468.png
 
Good luck on that one. Ok, so the connections is what you have " max analyzers" set at....but what does the 2000msec show? It appears its the same on all these examples.
 
  • Like
Reactions: 105437
Tinman said:
Good luck on that one. Ok, so the connections is what you have " max analyzers" set at....but what does the 2000msec show? It appears its the same on all these examples.
Click to expand...
My guess is that the Primary bar that ends at 2000 msec shows how many msec for the primary model to ID an object when it triggers.
 
  • Like
Reactions: Tinman
You must log in or register to reply here.
Top Bottom