Newbie Help Mini PTZ v2

J

jerrymax6

n3wb
Jan 22, 2016
14
0
Hi,


I am a newbie and appreciate any help you can give. I received my mini ptz v2 today and tried to connect it up like I did my Hikvision 4mp. The router doesn’t recognize that anything is plugged into it and my LTS DVR doesn’t show any IP camera. I’m getting power to the camera because it moves around and up and down when it first receives power. I didn't have any trouble connecting the Hikvision and a LTS camera.


I use mac computers and I’m not able to check out what is on the mini cd disc. Is there something I’m missing.


Any help you can give is appreciated.
 
they come with default ip address of 192.168.0.99, so manually set your mac's ethernet address to 192.168.0.100 and you should be able to browse to 192.168.0.99.
i know it needs an activex plugin to view video over the http connection, but not sure if you can at least configure it from non-IE/Windoze.
if not, you may need to have abuddy with a windows laptop come over and do the same thing or run SADP to set an IP address that works on your network.
I'll try mine from my mac when i'm home later. I'm sure Nayr will be along shortly to poo-poo our cam choice... :-)
 
  • Like
Reactions: jerrymax6
Alternatively download ivms4200 windows software and cam will be detected there even if it's on different subnet (192.168.0.x) then simply change IP address to whatever you prefer
 
  • Like
Reactions: jerrymax6
i just tested and my mac laptop works fine to configure the Huisun/Imporx mini-ptz (v2 at least).
viewing the video requires a plugin that doesn;t work on the mac, but the web UI does not depend on it for configuration.
So as I first suggested, just set your mac to an ip address on the same subnet as 192.168.0.99 and connect it directly
with an ethernet, then give it an address that will work with your your router/network. once it has an IP that works
on your net, your DVR should pick it up...
 
  • Like
Reactions: jerrymax6
@klasipca @pozzello I've connected my camera to my nvr and my pc to my nvr. I have no other means of powering it except through the nvr. I've changed the cameras ip settings to reflect my network and the dvr isn't picking it up. If I try to change it to reflect the other cameras ip address as assigned by nvr it doesn't work. Do I need to assign it to the nvr subnet and ip range? Which means I'll have to put my pc on that subnet as well to change the camer?

Sent from my SM-N920T using Tapatalk
 
Last edited by a moderator:
i've been changing default ip address 192.168.0.99 via IVMS-4200. Try that.
 
klasipca said:
i've been changing default ip address 192.168.0.99 via IVMS-4200. Try that.
Click to expand...
I was able to change the default ip address but I can't get the nvr to pick it up. The nvr assigns cameras a 10.1.0.xx address with a subnet of 255.255.0.0. I assigned the the camera a 192.168.1.xx that falls in line with my standard network.

What if I change the camera to a default dahua ip?

Sent from my SM-N920T using Tapatalk
 
JFire said:
I was able to change the default ip address but I can't get the nvr to pick it up. The nvr assigns cameras a 10.1.0.xx address with a subnet of 255.255.0.0. I assigned the the camera a 192.168.1.xx that falls in line with my standard network.

What if I change the camera to a default dahua ip?

Sent from my SM-N920T using Tapatalk
Click to expand...

Then you will need to assign the ip address in the same subnet as your nvr
 
Do you have your other cameras set to static or dhcp? Sounds like you have set to DHCP. You might have to change the MiniPTZ to a 10.1 address
 
rmw85 said:
Do you have your other cameras set to static or dhcp? Sounds like you have set to DHCP. You might have to change the MiniPTZ to a 10.1 address
Click to expand...
It was assigned but then I just left it there when I set it to static.

Sent from my SM-N920T using Tapatalk
 
Okay so I have the camera in the same ip range as my other cameras. Same sub and same default gateway. Still not recognized by nvr but I can log on via ivms but not web.

Sent from my SM-N920T using Tapatalk
 
bob2701 said:
And you are sure there is not a IP conflict with one of the other cameras? And all in the same subnet?
Click to expand...
I have no idea. I'm a noob to cameras or networking. I find it weird that I can see the ptz via ivms but neither of the other two cameras.

Sent from my SM-N920T using Tapatalk
 
JFire said:
I have no idea. I'm a noob to cameras or networking. I find it weird that I can see the ptz via ivms but neither of the other two cameras.

Sent from my SM-N920T using Tapatalk
Click to expand...

If you have a samsung 6 or probably any android use FING app its free it will tell you everything with IP on your wifi.
 
If you setup other brand cams, mini ptz is no different in terms of ip configuration
 
You must log in or register to reply here.
Top Bottom