Need some help with AI false positives

[Adam Hahler]

I’m running the built in AI on blue iris 6. Been working really well except for one problem. I have it configured to only trigger when it detects people or vehicles. Here’s the problem: when my dog is walking around outside and there’s vehicles parked in my yard, it will see the movement of my dog and trigger for the parked vehicle. I’ve attached a photo to show what I mean. How do I stop this from happening?

 

[Bruce_H]

I am sure that someone might have some advice, but I will say this, AI is not 100% you will notice that your propane tank is a car and what might be a ride on lawn mower is a person at least it was correct that your truck is a car, I don't think it differentiates by type of vehicle! I a number of people have been struggling with the detection of "static" objects, that is were you need to concentrate on, sorry I can not solve this for you!

 

[Bruce_H]

If you are interested there is a way to eliminate items that you are not interested in from being considered, might reduce the work load and eliminate it reporting on airplane and boats etc,

 

[MikeLud1]

It looks like you are using the Dark model, try the general model with a minimum confidence setting of 75%

 

[Adam Hahler]

It looks like you are using the Dark model, try the general model with a minimum confidence setting of 75%

Ok so I'm using the dark model at night. Should I continue doing that or use general on both? Here's my current day and night setup:

 

[MikeLud1]

Ok so I'm using the dark model at night. Should I continue doing that or use general on both? Here's my current day and night setup:

Give IPcam-General a try for both day and night

 

[Flintstone61]

Wait there's models?

 

[Flintstone61]

So I have to get the ipcam-general model somewhere and add it to the AI folder?
who pulled those out their ass and didn't tell me? Ok I'm trying this on 3 of my biggest triggering cams . I'll watch it for a couple days and see how its trending.

 

[Flintstone61]

I may be too far behind the curve to use all the features of BI, but I think I need to spend some time on different models.

 

[Flintstone61]

If I download a "raw" from CodeProject.AI-Custom-IPcam-Models/ONNX models/IPcam-general.onnx at main · MikeLud/CodeProject.AI-Custom-IPcam-Models
and insert it into AI models folder will that work?

 

[MikeLud1]

insert it into AI models folder will that work?

Yes