IReallyLikePizza2 Known around here May 14, 2019 2,712 6,297 Houston Jan 1, 2021 #1 Figured it might be of interest The power inlets are so that I don't need UPS's under my desk! Then I also have a rack in my garage, connected with 10G Fiber back to the main rack Reactions: dudemaar, MrRobinHood, Smilingreen and 23 others
Figured it might be of interest The power inlets are so that I don't need UPS's under my desk! Then I also have a rack in my garage, connected with 10G Fiber back to the main rack
SouthernYankee IPCT Contributor Feb 15, 2018 5,181 5,357 Houston Tx Jan 1, 2021 #2 very nice. Any special room cooling required ? Reactions: mat200
IReallyLikePizza2 Known around here May 14, 2019 2,712 6,297 Houston Jan 1, 2021 #3 Thanks, no special cooling, but it had an HVAC duct I turned into a forced air return with one of these Duct Fan Systems | Inline Fan Systems | AC Infinity Inc Inline fans tailored to duct systems that maximize air transfer with minimal noise. www.acinfinity.com Reactions: tech101, SouthernYankee and mat200
Thanks, no special cooling, but it had an HVAC duct I turned into a forced air return with one of these Duct Fan Systems | Inline Fan Systems | AC Infinity Inc Inline fans tailored to duct systems that maximize air transfer with minimal noise. www.acinfinity.com
saltwater Getting comfortable Oct 6, 2019 503 645 Melbourne, Australia Jan 1, 2021 #4 Nice rack. From patch panel to switch, looks very clean, a lot tidier than mine. Reactions: mat200
TheWaterbug Known around here Oct 20, 2017 1,353 2,347 Palos Verdes Jan 1, 2021 #5 That is the cleanest network closet I have ever seen. Here's my rat's nest: Reactions: JDreaming, Broachoski and mat200
samplenhold IPCT+ Member Aug 8, 2018 8,986 31,709 Spring, Texas Jan 1, 2021 #6 Wow, what are you using all that for? I mean besides IP Cams? Reactions: mat200 and Valiant
TheWaterbug Known around here Oct 20, 2017 1,353 2,347 Palos Verdes Jan 1, 2021 #7 Lots of stuff! That photo is of the "wiring cabinet" in this diagram: Reactions: MrRobinHood, Snapper30, SJGUSMC21 and 3 others
T tundradude Getting the hang of it Dec 20, 2018 41 48 Pittsburgh, PA Jan 1, 2021 #8 Thats really nice. I just did a system at work with 5 switches, I wasen't sure if it would work, but it works great. I see you have 5 or 6 too
Thats really nice. I just did a system at work with 5 switches, I wasen't sure if it would work, but it works great. I see you have 5 or 6 too
IReallyLikePizza2 Known around here May 14, 2019 2,712 6,297 Houston Jan 1, 2021 #9 Fiber for cameras means no PoE, so you'd have to run two cables Reactions: Broachoski and mat200
matchewready Getting the hang of it Dec 17, 2020 48 30 United States Jan 1, 2021 #10 Ok, I'm jealous. Reactions: Flintstone61
brianegge Getting comfortable Apr 27, 2020 213 275 Ridgefield, CT Jan 1, 2021 #11 IReallyLikePizza2 said: Then I also have a rack in my garage, connected with 10G Fiber back to the main rack Click to expand... You need 48 PoE ports in your garage? How many camera are you installing?
IReallyLikePizza2 said: Then I also have a rack in my garage, connected with 10G Fiber back to the main rack Click to expand... You need 48 PoE ports in your garage? How many camera are you installing?
IReallyLikePizza2 Known around here May 14, 2019 2,712 6,297 Houston Jan 1, 2021 #12 The thing is that 24 port switches are generally not installed in large quantities in commercial settings, its almost always 48 ports For that reason, a used 48 port switch is often cheaper than the 24 Reactions: sebastiantombs, mat200 and brianegge
The thing is that 24 port switches are generally not installed in large quantities in commercial settings, its almost always 48 ports For that reason, a used 48 port switch is often cheaper than the 24
E Edge540 n3wb Nov 5, 2019 5 8 Oklahoma Jan 1, 2021 #13 Curious what power bridges you are using for the TVs? We are building a house soon and will be doing this also.
Curious what power bridges you are using for the TVs? We are building a house soon and will be doing this also.
aesterling Getting comfortable Oct 9, 2017 428 413 USA Jan 1, 2021 #14 Is that IBM thing in the rack some kind of LTO tape drive?
IReallyLikePizza2 Known around here May 14, 2019 2,712 6,297 Houston Jan 2, 2021 #15 Edge540 said: Curious what power bridges you are using for the TVs? We are building a house soon and will be doing this also. Click to expand... This: https://www.amazon.com/ParkPower-150BBIW-RV-Power-Inlet-White/dp/B002QALLOQWith This: Commercial Electric 1-Gang Blank Maxi Metal Wall Plate, White Textured-PMTW-B - The Home Depot Just cut out the metal with a holesaw and mount in in there with a standard box, then just romex in the wall as usual aesterling said: Is that IBM thing in the rack some kind of LTO tape drive? Click to expand... Dual LTO5 tape library, holds a bunch of tapes and a robot moves them into the drives. Connects via SAS. Its a little old, but 1.5TB tapes that have a 40 year shelf live is handy. Plus I have a ton of tapes Reactions: aesterling
Edge540 said: Curious what power bridges you are using for the TVs? We are building a house soon and will be doing this also. Click to expand... This: https://www.amazon.com/ParkPower-150BBIW-RV-Power-Inlet-White/dp/B002QALLOQWith This: Commercial Electric 1-Gang Blank Maxi Metal Wall Plate, White Textured-PMTW-B - The Home Depot Just cut out the metal with a holesaw and mount in in there with a standard box, then just romex in the wall as usual aesterling said: Is that IBM thing in the rack some kind of LTO tape drive? Click to expand... Dual LTO5 tape library, holds a bunch of tapes and a robot moves them into the drives. Connects via SAS. Its a little old, but 1.5TB tapes that have a 40 year shelf live is handy. Plus I have a ton of tapes
IReallyLikePizza2 Known around here May 14, 2019 2,712 6,297 Houston Jan 2, 2021 #16 More power pictures Reactions: MrRobinHood, Baja, TRLcam and 3 others
G grumpywilson Pulling my weight May 1, 2019 190 189 NJ Jan 2, 2021 #17 What do you use the 30A turn lock outlet for?
IReallyLikePizza2 Known around here May 14, 2019 2,712 6,297 Houston Jan 2, 2021 #18 An SRT3000RMXLA UPS, if they ever come back in stock for cheap Then I can replace both of those UPS's with a single UPS, and its double conversion for extra cool points They are about $1400 used, but I don't want to pay over around $500. Just gotta wait for the deal to come around
An SRT3000RMXLA UPS, if they ever come back in stock for cheap Then I can replace both of those UPS's with a single UPS, and its double conversion for extra cool points They are about $1400 used, but I don't want to pay over around $500. Just gotta wait for the deal to come around
TheWaterbug Known around here Oct 20, 2017 1,353 2,347 Palos Verdes Jan 2, 2021 #19 It looks like IRLP2 is the example of what to do, and I'm an example of what not to do.
G grumpywilson Pulling my weight May 1, 2019 190 189 NJ Jan 2, 2021 #20 IReallyLikePizza2 said: An SRT3000RMXLA UPS, if they ever come back in stock for cheap Then I can replace both of those UPS's with a single UPS, and its double conversion for extra cool points They are about $1400 used, but I don't want to pay over around $500. Just gotta wait for the deal to come around Click to expand... I like that Idea. I wish all of my networking stuff was in one clean central place.
IReallyLikePizza2 said: An SRT3000RMXLA UPS, if they ever come back in stock for cheap Then I can replace both of those UPS's with a single UPS, and its double conversion for extra cool points They are about $1400 used, but I don't want to pay over around $500. Just gotta wait for the deal to come around Click to expand... I like that Idea. I wish all of my networking stuff was in one clean central place.