At home, I have a hodge-podge of different stuff, from old Foscam VGA IP cameras, to my LTD8308T-FT with some analog cameras, etc.. My goal is to have everything through one interface, with motion detection.. I had toyed with zoneminder before getting the LTD DVR, and I've toyed with MotionEYE running on a Raspberry pi, and it seems that my stumbling block is always lack of technical information on the LTD8308T-FT...
Does anyone know the URL I can put into another network DVR that would pull the current JPG or stream from a particular channel on the LTD8308T-FT? If so, I could have the LTD control my analog cameras, and have them secondarily fed into a Zoneminder install that could be the consolidated console.
Alternately, or also, what protocol does the LTD expect for connection to the 2 IP cameras it supports? I figure I'll not get it to talk straight to the Foscams, for example, but I got motionEye importing the video from the foscams, and have a URL in the format of "http://192.168.1.125:800/picture/1/current/" that gives the current picture from the foscam through MotionEYE, and I was hoping I could get the LTD to pull that in as an IP camera, but there's no place to enter a full URL - Only an IP address, a "protocol" which seems to just have a hardcoded setting of "default", whatever that means, a camera number, and user ID/password.. Nothing I've tried has been able to get the snaps/video into the LTS DVR...
Any help would be greatly appreciated! I guess the URL to pull images from the LTS would be my first choice, since then I could integrate it's cameras into ZoneMinder or BlueIris over the network..
Thanks!!
Steve
Does anyone know the URL I can put into another network DVR that would pull the current JPG or stream from a particular channel on the LTD8308T-FT? If so, I could have the LTD control my analog cameras, and have them secondarily fed into a Zoneminder install that could be the consolidated console.
Alternately, or also, what protocol does the LTD expect for connection to the 2 IP cameras it supports? I figure I'll not get it to talk straight to the Foscams, for example, but I got motionEye importing the video from the foscams, and have a URL in the format of "http://192.168.1.125:800/picture/1/current/" that gives the current picture from the foscam through MotionEYE, and I was hoping I could get the LTD to pull that in as an IP camera, but there's no place to enter a full URL - Only an IP address, a "protocol" which seems to just have a hardcoded setting of "default", whatever that means, a camera number, and user ID/password.. Nothing I've tried has been able to get the snaps/video into the LTS DVR...
Any help would be greatly appreciated! I guess the URL to pull images from the LTS would be my first choice, since then I could integrate it's cameras into ZoneMinder or BlueIris over the network..
Thanks!!
Steve