This is the alert image from the built-in AI. Does that mean it didn't continue evaluating images to see the license plate? None of the three images from this trigger show the license plate. What can be done to correct this? Thanks!
License Plate reading image
- Thread starter 105437
- Start date
MikeLud1
IPCT Contributor
Clone this camera and just have the clone camera do the license plate reading only, not object detection. Use the main camera for object detection only.
I'll try that, thanks. I thought about putting DoNotCancel in the To Cancel field to see if it would consider subsequent images for LPR. So uncheck "Primary Object Detection"?
MikeLud1
IPCT Contributor
Mike I see you post often of LPR. I just can’t see to get mine to work with new built in AI.
Do you have or know where step by step instructions are?
MikeLud1
IPCT Contributor
See if this helps
Here are my LPR AI settings. My LPR camera is set to 20 FPS, with the below setting when the LPR camera is triggered ever frame will be processed by the AI
Main AI settings
LPR camera AI settings
Main AI settings
LPR camera AI settings
See if this helps
Here are my LPR AI settings. My LPR camera is set to 20 FPS, with the below setting when the LPR camera is triggered ever frame will be processed by the AI
Main AI settings
LPR camera AI settings
So use your model. Should I duplicate a current cam and put in these settings?
MikeLud1
IPCT Contributor
Duplicate the cam if you are using it to also do object detection and just use the duplicate cam for LPR