latest firmware for DS-2CD2XX1、DS-2CD2xx5、DS-2CD2xx6、DS-2CD2xx7

D

dealpapa

Getting the hang of it
Jul 27, 2015
100
7
V5.4.41/V5.5.53/V5.5.61

in chinese. check chinese website for detail

IPC_E0_CN_STD_5.4.41_170707
IPC_R0_CN_STD_5.4.41_170707
IPC_R2_CN_STD_5.4.41_170707

IPC_E2_CN_STD_5.5.53_180717
IPC_E3_CN_STD_5.5.53_180713
IPC_G0_CN_STD_5.5.53_180716
IPC_G1_CN_STD_5.5.61_180718
 
The V5.5.53 build 180716 has been installed on my DS-2CD2035-I for 24 hours, so far so good.
 
Are these in english?
I did the mod on my DS-2CD2032 that allowed me to upgrade from 5.2.5 to 5.4.5. It should be able to upgrade to the newer V5.5.53 but im worried it might break the hack or be in chinese.

Thoughts?
Thank you for your help
 
tmushy said:
Are these in english?
I did the mod on my DS-2CD2032 that allowed me to upgrade from 5.2.5 to 5.4.5. It should be able to upgrade to the newer V5.5.53 but im worried it might break the hack or be in chinese.

Thoughts?
Thank you for your help
Click to expand...
If it aint broke, don't fix it.

Unless this is an extra camera you don't care about bricking.
 
  • Like
Reactions: tmushy
If you have access to the serial console, or can enable SSH, the commands
prtHardInfo
and
dmesg
will show the camera series.

In the example DS-2CD2335-I below it shows G0 in the firmware development path, and in the console info.
Code: 
alastair@PC-I5 ~ $ ssh [email protected]
[email protected]'s password:


BusyBox v1.19.3 (2017-01-18 20:54:04 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# prtHardInfo
Start at 2018-03-09 12:41:51
Serial NO :DS-2CD2335-I20160314AACH580509759
V5.4.41 build 170710
NetProcess Version: 1.7.1.179932 [14:53:09-Dec 10 2016]
Db Encrypt Version: 65537
Db Major Version: 1176
Db svn info:
Path: /Camera/Platform/Branches/branches_frontend_software_platform/db_process_for_5.4.20
Last Changed Rev: 233659
Last Changed Date: 2016-11-08 11:13:39 +0800 (Tue, 08 Nov 2016)
hardwareVersion    = 0x0
hardWareExtVersion    = 0x0
encodeChans        = 1
decodeChans        = 1
alarmInNums        = 0
alarmOutNums        = 0
ataCtrlNums        = 0
flashChipNums        = 0
ramSize            = 0x100
networksNums        = 1
language            = 1
devType            = 0x22501
net reboot count    = 0
vi_type            = 32
Path: /Camera/Platform/Branches/branches_frontend_software_platform/comm_bug_fix/cgi_fix/ipc_repair/ipc_5.4.24_g0
Last Changed Rev: 297913
Last Changed Date: 2017-07-10 21:23:14 +0800 (Mon, 10 Jul 2017)


#
# dmesg
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.35 (luoxiaobing@Cpl-Frt-BSP) (gcc version 4.8.3 20131202 (prerelease) (Hisilicon_v300) ) #1 Wed Jan 18 20:56:06 CST 2017
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: g0
[    0.000000] MISC TAGS: mdio_intf=mii phy_addr=3
 
Ok today i try connect camera to network becuase now is connect by NVR and i can not access to it by Batch Configuration Tool or i dont know how...?
 
You must log in or register to reply here.
Top Bottom