IVS setup advice on 270 degree view? PTZ

[stevef22]

Setup: Cam link here

• Mount: on a bracket about 24" off the right corner of the building, roughly [X] ft above grade
• Coverage: ~270° of usable view
• Key areas: front door at ~[X] ft, dumpster at ~[X] ft
• Lighting: [IR at night / parking lot lights / etc.]

What I'm trying to do:

1. Run a 270° tour once per hour, then return to a home preset covering the door and dumpster.
2. When a human is detected, auto-zoom in tight on them.

Questions:

1. Is this best done with a Tour vs. an Auto Scan, and does the Idle Motion / auto-home timer reliably pull it back to the preset after the tour?
2. Does IVS keep working during the tour, or do I need SMD/AI Tracking instead since IVS rules are tied to a fixed preset?
3. For the zoom-in behavior — is Auto Tracking the right tool, or should I use a tripwire/intrusion rule with a linked preset?

Appreciate any pointers. Thanks.