Is A GeoVision Camera and A Hikvision NVR Compatible?

glad to here you got it working, all i had to do on the NVR is manually add a camera set it to onvif with the username and password leaving the port at 80 and it connected.
 
Yeah,
copex said:
glad to here you got it working, all i had to do on the NVR is manually add a camera set it to onvif with the username and password leaving the port at 80 and it connected.
Click to expand...

Yeah, you would think that would be all that is needed. That's what I did with the Dahua cameras and it worked but it's not working with the GeoVision camera for some reason.
 
UPDATE: I'm relaunching a new Thread to see if it catches anyone else's attention. You would think SOMEONE out there has had a similar problem and either got it fixed or knows it can't be fixed.
 
Does anyone know if this ever worked?
I'm going to be swapping a dvr for a hikvision unit and going to be adding the existing geovision cameras to it.


Sent from my iPhone using Tapatalk
 
I got it working, first is you plug your geovision on the network.... not nvr yet.
Then you use gv utility and get in the programing of the cam you put the IP 192.168.254.6 (its in the 5th slot of the nvr) and you leave the port to 80 max bitrate 2048 and gateway is 192.168.254.1, once you change the gateway you dont have access to camera anymore, now you can plug it in the nvr select onvif port 80 and the ip 192.168.254.6 in slot 5 an then i rebooted the nvr, and voila it works ! the thing is if you wanna get back into the geovsion programming you have to plug your computer or laptop directly into the nvr(any port) and start the gv utility to gain access to it.
 
You must log in or register to reply here.
Top Bottom