IPC-T54IR-ZE-S3 - Not recording every second

[Rockjaw]

Has anyone ran into an issue when the camera doesn't record every second. Sometimes my camera will jump 2 or 3 seconds and doesn't record continuously. So when a vehicle is driving down the road it will pick it up about 3 houses away and then won't pick it up until after it's passed.

Does anyone know what setting I need to change so the Camera records continuously without any delays

 

[wittaj]

Are you using more than one motion detection like MD and IVS?

How is it being recorded? SD card or NVR or other VMS?

 

[Rockjaw]

Thanks for the quick reply, not sure about MD and IVS being on at the same time, I will go in this afternoon to make sure they are not. I am using an NVR model NVR8CH-8P-2AI. Thanks for your assistance

 

[steve1225]

1. Does storage -> schedule have selected General + Motion + Inteligent/IVS for that camera / channel?
It's should looks like:



2. if #1 doesn't help for new events - disable AcuPick for that camera (AI->AI Parameters->Smart Plan->AcuPick), select only IVS..

3. How You enabled Detection - in SMD or IVS menu?

Show screen shot of AI -> AI Parameters -> IVS for that channel..

 

[Rockjaw]

Are you using more than one motion detection like MD and IVS?

How is it being recorded? SD card or NVR or other VMS?

Hi @wittaj I captured a few screen shots from both GUI and NVR settings (below). I'm not sure if this is configured correctly, is there something I need to change so it's not leaving that 2-3 second gap in continuously recording.

 

[bigredfish]

Disable AcuPick as mentioned. Only thing that should be ticked is IVS

Also, are you certain its skipping recording? or just in live viewing?

Can you post a short clip showing it skipping?