Imou Ranger 2: Access via ONVIF

[freemanfx]

I have a Hikvision DS-7608NXI-K2/8P NVR and I want to add it in the admin interface so that I can record and have the camera in the same app.

 

[agrogers]

Hmm, I am not sure about your NVR. I don't have any problems adding my cameras to BlueIris regardless of the subnet it is on. It is only finding cameras in t he Config Tools where I have problems finding them. Does the NVR allow you to specify an RTSP feed? If so you can use something like this: rtsp:/192.168.0.247/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif

or

rtsp:/user: [email protected]/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif

 

[fekry]

Hi there, i got today a Ranger 2 (A1) and got ONVIF working, but...push to talk is available but doenst work "talking failed". I also have an Tapo TPLink C200 in same situation, ONVIF OK but no talk to camera available...anyone with this function? By the way, how to disable the watermark and date/time?!?!

EDIT: By the way, how to disable the watermark and date/time?!?!
I tried do download app called "ConfigTool Mobile" and it can disable date and time and IMOU letters and can change other settings and check open ports or default ports for Ranger 2! Better than the default IMOU app!!!

I was able to remove time OSD using dahua smartpss

 

[erfint4]

I tried tha url and works from my windows VLC. Thats fine for watching the stream but what i want is directly record the stream in my raspberry pi when an alarm ocurs...