HP EliteDesk G4 SFF Randomly Shutting Down (Crashing)

C

COtto1984

Getting the hang of it
Jul 1, 2019
90
51
Texas
I have Blue Iris system that randomly crashes / becomes unresponsive. Blue Iris logs show unexpected shutdown with no clear indication of anything going wrong with Blue Iris itself. Windows Event logs also do not show an events prior to becoming unresponsive. Thus I'm guessing either something is going on with the hardware or possibly at the kernel level of Windows 11 (latest version). This issue has been going on for a couple years, but has recently seemingly increased in frequency.

I'm going to pull the system down out of my rack to ensure there is not significant dust build-up inside and that the fans are working properly, but wanted to get advice on other potential troubleshooting steps.
 
COtto1984 said:
I have Blue Iris system that randomly crashes / becomes unresponsive. Blue Iris logs show unexpected shutdown with no clear indication of anything going wrong with Blue Iris itself. Windows Event logs also do not show an events prior to becoming unresponsive. Thus I'm guessing either something is going on with the hardware or possibly at the kernel level of Windows 11 (latest version). This issue has been going on for a couple years, but has recently seemingly increased in frequency.

I'm going to pull the system down out of my rack to ensure there is not significant dust build-up inside and that the fans are working properly, but wanted to get advice on other potential troubleshooting steps.
Click to expand...

Try this :

Run a RAM health check
Check for Virus ( not thinking this is likely, thus I'd check RAM first )
Check filesystems and DB health

Power Supply going bad?
 
COtto1984 said:
I'm going to pull the system down out of my rack to ensure there is not significant dust build-up inside and that the fans are working properly, but wanted to get advice on other potential troubleshooting steps.
Click to expand...

I was going to ask if this happened only when running BI or it just shuts off after a time running another program especially when taxing the CPU. I've had MANY PC's become so clogged with dust (especially those sitting on the floor where carpet is installed) that they will slow down and eventually shut down. Even had some older ones where the plastic ears that attach to the spring clamps that hold the CPU heatsink to the CPU broke because of long-term heat + tension finally caused one or more to snap, rendering the heatsink almost useless. Even had some CPU thermal compound dry up to the point of almost useless, allowed CPU them to rise above the allowed limit.

I don't used canned air or air from a compressor line due to either excess moisture or static...I have a handheld electric blower, kind of a hair dryer on steroids less the heat that blows out PC interior, vent holes, heatsink and fans really well. I hold the fans still while blowing so as to not exceed RPM....and I do NOT try to stop with my finger if I forget to hold them first. I found out early on that a rapidly spinning chassis or CPU fan can cut your fingers!
 
  • Like
Reactions: mat200 and COtto1984
mat200 said:
Try this :

Run a RAM health check
Check for Virus ( not thinking this is likely, thus I'd check RAM first )
Check filesystems and DB health

Power Supply going bad?
Click to expand...
Thinking there is a possability of power supply issue. Apprecaite the suggestions. Will began running some test and evaluating system.
 
  • Like
Reactions: mat200
You must log in or register to reply here.
Top Bottom