How to use auto tracking with VC-SDV4825IW-F

[Turks]

Hi Guys. I am trying to figure out how to use auto tracking with my VC-SDV4825IW-F. I am switching them out because the current ones my client is using (the big ones with the little wipers on them) use too much power (802.3.bt) but the auto tracking feature was simple to setup. I cannot figure out how to setup the auto tracking with this camera

 

[Turks]

Also is there a way to remove this blue border and that square yellow target box? I setup an IVS rule to try and do the auto tracking , just didnt have to do all that with the other camera I had . Is this the only way to do it?

 

[ludshed]

If that view is from the monitor connected to nvr in display menu there’s an option ‘show ivs rule.’

If that’s smart pss you should be able to just right click on stream.

 

[Turks]

If that view is from the monitor connected to nvr in display menu there’s an option ‘show ivs rule.’

If that’s smart pss you should be able to just right click on stream.

Well that was easy lol. Thanks a million!!