how do I fix "Abandoning deadlocked decoder thread 18 310 0"

[Coldair]

and is this what is causing my cameras to go off and back on at random times?


1 8/24/2026 11:41:18.868 AM Cat2 Signal: network retry
0 8/24/2026 11:41:30.600 AM FD210 Signal: main stream loss
1 8/24/2026 11:41:30.600 AM FD210 Signal: network retry
1 8/24/2026 11:41:33.667 AM Gate225 Signal: network retry
0 8/24/2026 11:41:36.688 AM garage Signal: main stream loss
1 8/24/2026 11:41:36.688 AM garage Signal: network retry
4 8/24/2026 11:41:38.234 AM Gate225 Signal: restored
0 8/24/2026 11:41:38.275 AM SHOP217 Signal: main stream loss
1 8/24/2026 11:41:38.275 AM SHOP217 Signal: network retry
1 8/24/2026 11:41:43.305 AM garage Abandoning deadlocked decoder thread 18 310 0
1 8/24/2026 11:41:43.885 AM CallBox203 Signal: network retry
1 8/24/2026 11:41:44.915 AM SHOP217 Abandoning deadlocked decoder thread 18 310 0
0 8/24/2026 11:41:48.044 AM bear215 ONVIF Event: MotionAlarm (State="true")
0 8/24/2026 11:41:48.157 AM bear215 ONVIF Event: IsMotion="true"
0 8/24/2026 11:41:48.157 AM bear215 ONVIF Event: RuleEngine/CellMotionDetector/Motion
4 8/24/2026 11:41:48.448 AM CallBox203 Signal: restored
1 8/24/2026 11:41:48.944 AM Cat2 Signal: network retry
1 8/24/2026 11:41:49.311 AM Cat2 Signal: Failed to connect
0 8/24/2026 11:41:54.148 AM bear215 ONVIF Event: RuleEngine/CellMotionDetector/Motion
0 8/24/2026 11:41:58.068 AM bear215 ONVIF Event: MotionAlarm (State="true")
0 8/24/2026 11:41:58.173 AM bear215 ONVIF Event: IsMotion="true"
0 8/24/2026 11:41:58.174 AM bear215 ONVIF Event: RuleEngine/CellMotionDetector/Motion
3 8/24/2026 11:41:59.020 AM cat1 Trigger: Motion,Zone A

 

[Flintstone61]