hikivision showing in sadp put cannot connect

[hpadda]

ip address:192.168.2.79
port: 8000
subnet mask: 255.255.255.0
gateway: 0.0.0.0
ipv6 address and gateway:::
ipv6 prefix length:64
http port: 80

it was working earlier but it stopped working out of no where

 

[marku2]

ip address:192.168.2.79

is your computer on the same ip address on your lan
eg computer lets say has an ip address of 192.168.1.10 and your hikvision camera would have an ip address of 192.168.1.85
then on the web browser type in 192.168.1.85 and the log in page will open type in admin and your password and you will see the live view if you are using
the correct web browser and plug in

 

[hpadda]

sweet! you figured it out, appreciate it man... tried everything

is your computer on the same ip address on your lan
eg computer lets say has an ip address of 192.168.1.10 and your hikvision camera would have an ip address of 192.168.1.85
then on the web browser type in 192.168.1.85 and the log in page will open type in admin and your password and you will see the live view if you are using
the correct web browser and plug in