EmpireTech Andy

O

oskar221

n3wb
Sep 19, 2026
3
0
CH
Anybody is getting any replies from Andy?
I am trying since Sunday to reach Andy by email without any success. I get no reply from his end. Thanks
 
He put a post on my thread on 2026-09-28.

E

Thread 'Failed Empiretech PSU?'

So I bought an NVR16CH-AI-S2 from Andy in May 2026. I know the PSU and NVR worked initially, as I powered it up on the bench to perform some initial configuration.
It then sat around for a while as I slowly built out the infrastructure in a new building, until this month I finally had enough in place (power etc), that I thought I would do a quick power-on of the NVR, making sure the lights and HDD powered up. (I didn't even have a monitor with me).

Plugged in, switch on, nothing. So I measure DC out of the PSU; 5.x volts... It's meant to be 12v I believe.

Now I know...
 
You must log in or register to reply here.
Top Bottom