Download link for this firmware, please.
I did find the Chinese language only version? No multilanguage)
DH_NVR5XXX-4KS2_Chn_V4.001.0000003.2.R.201010.bin
Last edited:
DH_NVR5XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813
- Thread starter EMPIRETECANDY
- Start date
I did find the Chinese language only version? No multilanguage)
DH_NVR5XXX-4KS2_Chn_V4.001.0000003.2.R.201010.bin
You should be able to obtain this update directly from your NVR... At least this is how I upgraded mine. No issue so far.
For me, this firmware (V4.001.0000003.2, Build Date: 2020-10-10) changed all of my substreams to H265 from H264. This had me confused for a bit as I need my substreams on H264. Might save someone a headache...
I understand that this post is regarding NVR5XXX, but I have a NVR4216-16P-4KS2 currently running firmware V4.000.0000001.1 V2.0. I have been unable to find the release notes for the most recent firmware for this NVR (I believe V4.001.0000000.3.R.201022). Can anyone point me as to where I can find the release notes? Thank you!!!!!
Still there is a bug in this release.
If you access the NVR from remote IP you cannot open the camera configuration webpage links.
They try to open the internal ip address.
Can confirm that V4.001.0000003.2, Build Date: 2020-10-10 caused all my cameras to jump to port 37777 from port1, port2 ect. This broke virtual host as above. Deleting cameras and re-adding I was able to get some cams back to the connected port ( port1, port2...) but not all. anyone know if it is possible to go back to build 200813? Thanks.
Cmos are you accessing NVR webpage using remote IP address and port?
Or internally via same network.
The camera configuration webpage link never worked for me remotely.
Only if I connect to same network.
I would think to remotely access the NVR webpage you would need to do some port forwarding and I don't do that for security reasons.
NVR5XXX-4KS2_MultiLang_ V4.001.0000003.2.R.201010
Hey guys, The latest new fimware has been released, this is the best version that we have now for the 5 series. Attention: We don't undertake any risk that brick the NVR, If your NVR firmware still at 2018 or early 2019, Please think twice to make the upgrade. Sure the firmware only work for...
LASTEST new firmware has been released. I will release some more new firmware on this link.
TIGOS1
Young grasshopper
NVR5XXX-4KS2_MultiLang_ V4.001.0000003.2.R.201010
Hey guys, The latest new fimware has been released, this is the best version that we have now for the 5 series. Attention: We don't undertake any risk that brick the NVR, If your NVR firmware still at 2018 or early 2019, Please think twice to make the upgrade. Sure the firmware only work for...ipcamtalk.com
LASTEST new firmware has been released. I will release some more new firmware on this link.
Hi, ANDY!
As of now, all DAHUA DVR XVR devices work with IPC series cameras.
At the same time, everything is very bad with updates for them.
Maybe you could open another branch with new software for HCVR XVR?
TIGOS1
Young grasshopper
You are very good at clarifying all the good and bad options when upgrading.
You describe in detail what devices your firmware is suitable for.
You answer users' questions.
And the fact that on the DAHUA website - I heard a lot about the fact that after the firmware a brick is obtained.
Especially if the old version was 3.0 and 4.0 was requested.
You also have information about new firmware for specific devices much earlier than on the DAHUA website.
Therefore, I would like to ask you, if it is not very difficult - add a section for XVR
TechBill
Known around here
- Nov 1, 2014
- 1,829
- 1,190
@EMPIRETECANDY sell and support products that are in demand and he also invested lot of his time on those popular products.
We are graceful for this so I wouldn’t pressure him adding more time of his on products that aren’t in demand. Andy did point out that the software are available on Dahua website.