DH-SD59225U-HNI alarm track time no more than 15 sec

bethlehemroelof

bethlehemroelof

n3wb
Aug 23, 2020
8
5
Netherlands
Hello,

I've tried 2 different firmwares and both will not let me track more than 15 sec.

Knipsel.JPG

When i put in 60 sec and save it the next time i log in it stil shows 15 sec.

Device Type DH-SD59225U-HNI
System VersionV2.800.0000000.5.R.E4.2512.8S.NR, Build Date: 2019-08-27
WEB VersionV3.2.1.780791
ONVIF Version18.12(V2.4.5.729857)
PTZ VersionV3.02.85.RHNT_17_22722

is there anybody who can help me fix this problem???
 
Last edited:
I believe you can change that, only in Internet Explorer. It doesn't work in other browsers.
 
I have experient the same, I can change it but it doesn't "stick".
I downloaded and tested successfully with duckduckgo for android. Will likely work with other browsers as well but I started testing different solution as Chrome (for android) didn't work.
 
Ok, i downloaded duckduckgo for android and changed the track time.

I've logged in from home. Camera is at a dirttrack nearby, so will test tomorow.



Thx for your help, hope it works!!!!!!!!
 
  • Like
Reactions: genelit
Hi again,

OK, i found this in the 59225U-HNI manual, in the PTZ-section of the settings. I don't have that camera and this setting is not available in my camera.
Have you checked it?

Further, I assume you checked that the "normal" Auto track conditions are fulfilled in your short recording above -> I.e that the target object is not lost ?


Capture.JPG

Edit: link to manual. This if found in section 5.3.2.7 Intelligence , page 95.
 
What did the video show? If the subject stopped or was too fast and autotrack didn't keep up, it will quit recording based on your time setting.
 
  • Like
Reactions: genelit
You must log in or register to reply here.
Top Bottom