DH-SD3E405DB-GNY-A-PV1 - Warm light illumination conundrum
- Thread starter war4peace
- Start date
Huh, interesting, let me check that. Using mainly Chrome, but I have a plethora of browsers installed.
It's asking me to install a plugin for live view, downloaded from camera, afterwards I got image.
Still no "Day / Night switch" radio button.
I went through most of the pages, they look exactly the same as in Chrome. not sure about settings being properly saved, I guess we'll see
It's asking me to install a plugin for live view, downloaded from camera, afterwards I got image.
Still no "Day / Night switch" radio button.
I went through most of the pages, they look exactly the same as in Chrome. not sure about settings being properly saved, I guess we'll see
These cameras use "AI" I bet some of the configs won't work the same because your camera is not connected to the internet.I know where the settings are, what I am wary of is actually saving those settings. It looks like my camera UI doesn't properly apply/save settings.
That's the reason for creating this topic in the first place
Later edit: I don't even have the "Day / Night switch" radio button in my camera UI.
Most of us here don't have our cameras connected to the internet and all the functions work just fine.
Now if it is a cloud-based camera like a Ring, then yeah without internet it won't work, but this camera isn't dependent on the internet.
It has been proven here time and again that certain Dahua and Hikvision cameras do not show all the functions or the save doesn't work right unless the correct browser is used. Him using Chrome would be part of the problem. Especially the Dahua PTZs as an example.
For those that do not know...use IE browser for Dahua (and others?) camera GUI to see more options
I've been using Chrome since I bought my first Dahua camera from Andy last year (the good 'ol 4231's). I was able to log in, see menu options, do the config, save, logout....all done. Always wondered how folks were able to see the AI detection boxes livestream and other stuff which I thought...
It has been proven here time and again that certain Dahua and Hikvision cameras do not show all the functions or the save doesn't work right unless the correct browser is used. Him using Chrome would be part of the problem. Especially the Dahua PTZs as an example.
For those that do not know...use IE browser for Dahua (and others?) camera GUI to see more options
I've been using Chrome since I bought my first Dahua camera from Andy last year (the good 'ol 4231's). I was able to log in, see menu options, do the config, save, logout....all done. Always wondered how folks were able to see the AI detection boxes livestream and other stuff which I thought...ipcamtalk.com
I did use IE as well, see above, the UI did not change one bit in the areas I was interested in.
PTZ functions via browser are completely irrelevant to me, because I am not using the browser to use and control the camera, and the AI functions work fine (simple stuff, just a couple ROI for soft tracking). Camera usage is all done via ONVIF and Blue Iris with CodeProject.AI, basically automated. Blue Iris control works very well (PTZ, motion detection, identification, alerts). Furthermore, this is the only Dahua camera with strange behavior when saving settings. I own 3x Dahua and 1x Hikvision cameras, but this one is indeed the only Dahua PTZ (the other one is Hikvision, never had a problem with it).
@war4peace My PTZ came in. My ptz spotlights turn on and off when it gets dark. If my electrical floodlight turns on the PTZ spotlights turn off.
My camera Dahua SDT4E425-4F-GB-A-PV1 4MP+4MP 25x PTZ
My camera Dahua SDT4E425-4F-GB-A-PV1 4MP+4MP 25x PTZ