Dahua PTZ in Blue Iris Not Working

C

check12

n3wb
Jun 28, 2015
10
4
Hi There Folks,
I just purchased the SD1A203T-GN-W and got it up and running in Blue Iris. I have tried everything I can think of to get PTZ working within BI, but it won't budge using the BI controls. It does work correctly through the Dahua web interface.

I am currently using the default settings from "Find/inspect" and the PTZ tab is using the ONVIF profile. I also tried all of the Dahua profiles to no avail.

Finally, I confirmed that the account being used actually does have PTZ privs, which it did.

Any thoughts on what to try next to troubleshoot?

Thanks very much.
 
check12 said:
Hi There Folks,
I just purchased the SD1A203T-GN-W and got it up and running in Blue Iris. I have tried everything I can think of to get PTZ working within BI, but it won't budge using the BI controls. It does work correctly through the Dahua web interface.

I am currently using the default settings from "Find/inspect" and the PTZ tab is using the ONVIF profile. I also tried all of the Dahua profiles to no avail.

Finally, I confirmed that the account being used actually does have PTZ privs, which it did.

Any thoughts on what to try next to troubleshoot?

Thanks very much.
Click to expand...
What exact version of BI are you using?
 
There are several Dahua options to try in Blue Iris.

51wzmd5.png


Amcrest/Dahua
Dahua/Q-See RTSP
Dahua New
ONVIF (OXML)

If using the ONVIF option, make sure your camera has the ONVIF login configured correctly. ONVIF and normal web interface logins are wacky and kind of separate. If you add a normal user, it doesn't get added to the ONVIF section. Of course it is different in some firmware versions.

qhtN3nH.png
 
  • Like
Reactions: fenderman
bp2008 said:
There are several Dahua options to try in Blue Iris.

51wzmd5.png


Amcrest/Dahua
Dahua/Q-See RTSP
Dahua New
ONVIF (OXML)

If using the ONVIF option, make sure your camera has the ONVIF login configured correctly. ONVIF and normal web interface logins are wacky and kind of separate. If you add a normal user, it doesn't get added to the ONVIF section. Of course it is different in some firmware versions.

qhtN3nH.png
Click to expand...
Thanks very much. Unfortunately, I have tested all of those configs already with no luck, but I will go back and try them again.

I also did try to troubleshoot the privs already and confirmed I am using the admin account - which has full privs. I am a bit stumped right now, but will go back and try these steps again.
 
Update: It worked. I went back and re-entered the ONVIF user info again (same password in old, and new fields) and now it works. No idea why. Thanks so much.
 
  • Like
Reactions: Cameraguy
check12 said:
Update: It worked. I went back and re-entered the ONVIF user info again (same password in old, and new fields) and now it works. No idea why. Thanks so much.
Click to expand...

Unfortunately i am having the same problem with the 4k Version of this camera. (Dahua DH-SD1A404XB-GNR)

Would do you mean you re-entered the ONVIF user info again? When you insert the wrong credentials the camera will show you an error.

So i am not getting what went wrong in your situation. Could you explain that? There is only one place where you have to enter camera credentials right?

My camera is working fine except the PTZ part.
 
You must log in or register to reply here.
Top Bottom