Dahua NVR5208-XI (WizMind) — worth it or better options?

cctvguynz said:
I'm meaning the ability to see an image of a person, click on it, and then instantly see a snapshot of every other time that person has been detected by a camera on site.
Click to expand...
Clicking a person from playback and searching by that person across cameras is AcuPick.
 

Attachments

  • 1000px-AcuPickHumanTargetSearch3.png
    1000px-AcuPickHumanTargetSearch3.png
    749.3 KB · Views: 1
So this is definately supported on the EI or EI2 models? I simply can't get it to work but it works fine on the XI model.
 
cctvguynz said:
So this is definately supported on the EI or EI2 models? I simply can't get it to work but it works fine on the XI model.
Click to expand...
I'm guessing the NVR -EI you have either requires AcuPick processing to be done by the camera (supported camera), or it needs a firmware update to get the feature.
 
cctvguynz said:
So this is definately supported on the EI or EI2 models? I simply can't get it to work but it works fine on the XI model.
Click to expand...

Yes, it supported...

You must enable AcuPick mode on EI NVR's in NVR SmartPlan... And also AcuPick must be enabled on cameras (cam must support it)...
XI and EI2 don't have those requirement (AcuPick is always enabled, XI/EI2 can add AcuPick to a few non AcuPick cams)...

Screenshot 2025-09-23 at 10.15.29.png
 
Mark_M said:
I'm guessing the NVR -EI you have either requires AcuPick processing to be done by the camera (supported camera), or it needs a firmware update to get the feature.
Click to expand...

Yes - AcuPick must be supported by cam..

XI & EI2 models have limited capability to add AcuPick processing to a few non AcuPick cams.. But not EI (it's 2022 model with not so strong SOC / AI processor)..
 
  • Like
Reactions: Mark_M
Nighthawk37 said:
does anyone have a comparison to how Andy's NVR16CH-AI NVR model equivalent is on the Luminys side? I'm guessing R52-16PA but can anyone confirm? thanks
Click to expand...

it's not - decoding capabilities are half of 5xxx-EI (-AI models in Andy shop)..
And 5xxx-EI is old model (2022), replaced by new 5xxx-EI2 (AI-S2 in Andy shop, 2x more AI limits, bigger decoding capabilities, some extra AI functionality)..

ps. I'm not 100% sure, but as I understand Luminys vs Dahua situation, Luminys NVR will not support Dahua cams as NATIVE cam (with all capabilities)... They use own private protocol implementation. Only ONVIF without any functionality.
 
You must log in or register to reply here.
Top Bottom