DAHUA EOL: 2MP 30x IR PTZ DH-SD6AEA230FN-HI updating firmware issue, network error, maybe timeout

Jan 16, 2020
23
0
UK
:mad:DAHUA EOL: 2MP 30x IR PTZ DH-SD6AEA230FN-HI updating firmware issue, network error, maybe timeout

Ive tried around 3 of these cameras and they will not allow me to change the IP Address and the default one doesn’t load up on IE

Im thinking the cameras are all faulty?

As I did manage to change one of them but the other 3 x don’t change the IP and on IE they don’t load up

I keep getting the message: network error, maybe timeout ??

That darn orange triangle ☹ I want to see a green tick!!!!!!!!

Anyone else have this issue? And does anyone know about firmware for the one I got working

Thanks

Adam:)


DSC09581.JPG
DSC09583.JPG

DSC09579.JPG
 
Is the network or direct link to your computer set on the usual subnet?
If connected directly to a computer, the computer cannot gain an IP in DHCP.

Other than that, maybe a hardware reset is needed....
 
Thanks Mark Just got another one working so ive managed to change 2 x of the IP addresses okay

But the other 3 x dont, im thinking they are faulty, unless someone else knows how to fix?

ive tried numerous times! and did the resets many times and changed ports etc, restarted PC

2 x cameras changed the IP straight away

3 x cameras come up with
network error, maybe timeout
 
What power supply are you using? Could the issue be inadequate/unstable power? I'd recommend a PoE injector or switch.
Yes, good point.
I also had an issue with a faulty SD card that made a Bosch fixed dome keep restarting.
 
Hi

Please keep in mind

Ive successfully changed 2 x IP addresses on these cameras

Its just the other 3 x that don't

Using the same PSU 24V 5a