Cant view 1080P on TV. Only 1280X1024

stevef22

stevef22

Getting the hang of it
Mar 7, 2016
164
33
Hi everyone,

Have a Dahua NVR and cameras with cameras bought from Andy. NVR Model: NVR4216-16P-4KSS2

VGA is going to standard computer monitor. Displays 1920X1080 correctly.

HDMI is going to a HDMI over CAT 6 Extender to TV downstairs. Amazon Link Here HDMI

I can see 1280X1024 resolution on TV just fine using the extender device. But will not display 1920X1080. Says "no video signal"

When NVR first boots up, I can see Dahua NVR logo on TV. Then when loads cameras nothing. LCD Monitor connected VGA looks fine on 1080p.

Why will TV not display 1080p signal?



*Note

I tested a standard DVD Player upstairs in NVR room. Hooked DVD player to NVR and video signal displayed fine on tv downstairs in 1080p. So I believe my HDMI over CAT extender is working fine.
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
stevef22 said:
Hi everyone,

Have a Dahua NVR and cameras with cameras bought from Andy. NVR Model: NVR4216-16P-4KSS2

VGA is going to standard computer monitor. Displays 1920X1080 correctly.

HDMI is going to a HDMI over CAT 6 Extender to TV downstairs. Amazon Link Here HDMI

I can see 1280X1024 resolution on TV just fine using the extender device. But will not display 1920X1080. Says "no video signal"

When NVR first boots up, I can see Dahua NVR logo on TV. Then when loads cameras nothing. LCD Monitor connected VGA looks fine on 1080p.

Why will TV not display 1080p signal?



*Note

I tested a standard DVD Player upstairs in NVR room. Hooked DVD player to NVR and video signal displayed fine on tv downstairs in 1080p. So I believe my HDMI over CAT extender is working fine.
Click to expand...

Hi @stevef22

Start with the most basic test:
Test with the NVR hooked up via HDMI to a local display ( leave the VGA disconnected ). Does it work in 1920x1080?
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
Hi Mat200, thx for reply.

Yes, Straight connection, no CAT6 Extender: HDMI to local LCD display (left vga disconnected). Displays 1920X1080 correctly.

HDMI though CAT6 Extender displays NVR logo, then nothing.
 
  • Like
Reactions: mat200
stevef22 said:
Hi Mat200, thx for reply.

Yes, Straight connection, no CAT6 Extender: HDMI to local LCD display (left vga disconnected). Displays 1920X1080 correctly.

HDMI though CAT6 Extender displays NVR logo, then nothing.
Click to expand...

Hi stevef22

OK, now try the Cat6 extender with a known good short cat6 cable.
 
You must log in or register to reply here.
Top Bottom