24 port switch, unmanaged for cameras only 300w / who has the best? budget 300.00

The bottle neck i created with Yuanley 5 port (4POE+1Gigabit uplink ) was enough to steer me away from them, will probably bite the bullet and fire up the Cisco small business 24 port. (12 Gigabit POE ports)
YMMV
 
  • Like
Reactions: observant1
switching speed and backplane speeds
Click to expand...
Some switch manufacturs quote frame rate, but leave out the size of the frames.

The price difference of the switches with gig ports, not just the uplink ports require a much higher backplane speed for not much more money than one with the same number of ports @10/100
 
I wanted to experiment to see if I could push 2 NVR's and 1 POE cam back to the house switch......from the garage where devices are located. The total bandwidth of 11 cams seemed to exceed the capability of the device.
1667667464320.png
 
Last edited:
  • Like
Reactions: looney2ns, sebastiantombs and observant1
Something many may already know, some of the switches priortize the 1st few ports when it come to power. If a switch was on the edge of it's total POE budget, it will deem the 1st few ports more important and cut power to the cameras on say port 15&16.

I think most of us try not to overload our poe budget. :idk:
 
My Yuanley powered only 1 5231 cam.....the NVR's were not using POE,,,,but i think the NVR on 1 port is too much bitrate for this setup
 
Perhaps used in the 1 camera 1 port design it will be fine....
 
I look at all the hardware running in the garage, and think, ya know for all the bullshit.....I could unplug all this crap and just put it thru the Cisco...
 
As an eBay Associate IPCamTalk earns from qualifying purchases.
  • Like
Reactions: mat200 and sebastiantombs
People get used to seeing these consumer switches with Wall Warts, and Power bricks....
 
As an eBay Associate IPCamTalk earns from qualifying purchases.
  • Like
Reactions: looney2ns and mat200
Yeah some ebayers dont what the hell they are peddling...He's a professional garage saler...Not an off lease bulk type guy.....
The sellers are as important as the item....maybe more.
Probably all the shit that washed up in his yard while he was out looting. :)
 
  • Like
  • Haha
Reactions: looney2ns and mat200
I would also argue that a large part of the appeal of something like some of the newer "prosumer" Netgear switches is also the far lower standby power use and zero noise. Most of the big used enterprise switches tend to have very loud fans, as well as "idle" (before plugging any devices in) power draw upwards of 40-50 watts. If you don't mind those two factors, then yes, they are generally much cheaper than new equipment, and will likely be dead stone reliable in a home environment. YMMV, and personal choices....
 
  • Like
Reactions: observant1 and Flintstone61
FWIW - I also like HP Pro Curve switches ..
 
  • Like
Reactions: Flintstone61
You must log in or register to reply here.
Top Bottom