dahua
-
Stuttering/Blinking Playback on IPC-HDW5442TM-ASE after 2025 Firmware Update (V2.840.0000000.30.R)
Hi all, I’m looking for some insight on a playback bug with my IPC-HDW5442TM-ASE (1st Gen). Since upgrading to the latest Feb 2025 firmware (V2.840.0000000.30.R, Build: 2025-02-27), I’m getting a consistent 1–2 second "blink" or freeze in DMSS right at the start of any recorded IVS event (also... -
Lorex Cloud LHV221600/LHV2016 Boot Loop Help!
Hi everyone, I’m looking for recovery help on a Lorex Cloud LHV221600 DVR. It may be the same hardware family as LHV2016 (that's the hostname that shows up on LAN), but I’m not 100% sure. Model string I’ve seen in env is deviceid=lhvb11f1e4f6. Problem The unit boot loops continuously. Over...- asm340cs
- Thread
- boot loop dahua firmware error help help needed ipcam ipcam firmware lorex tftp uart
- Replies: 7
- Forum: NVR's, DVR's & Computers
-
K
Can i directly connect a non-onvif IPC to a dahua NVR and use RTSP.
Hi all, We just had our swann system's NVR die and I am doing a mad scramble to try to learn enough to get a system running with a new NVR (dahua NVR5216-16P-EI ?!?). I am hoping to use at least some of the 16 x NHD865MSB cameras with the addition of some real cameras that can actually pick up...- kazafog
- Thread
- dahua nhd865 rtsp
- Replies: 6
- Forum: NVR's, DVR's & Computers
-
T
Looking for advice to replace existing cameras
Hi all, I'm currently running Reolink RLC-1224A cameras but they haven't met my expectations (poor nighttime performance and the streams to frigate are not great), so I'm looking to replace them with a Dahua, Hikvision, or Empiretech based system. I'd appreciate advice on camera selection for...- thomasvh6
- Thread
- dahua frigate hikvision reolink
- Replies: 6
- Forum: Camera Installation Questions
-
Camera quit working in the cold
Good afternoon! I have two EmpireTech IPC-Color 4K-T cameras. Both are outdoors. One of them has decided to quit working since the cold weather hit. I brought it inside, connected a shorter cable from the PoE directly to the network switch, and it stayed on for four hours. I took it back... -
I need an API call that returns a list of all cards/users
I’m working with the Dahua CGI API on a VTO (Doorbell) unit and I’m hitting a wall retrieving the actual Personnel Names. I can successfully query the card database using:http://ip/cgi-bin/recordFinder.cgi?action=find&name=AccessControlCard However, the response returns the PersonID/UserID...- leonardokoleci
- Thread
- dahua vto
- Replies: 1
- Forum: Dahua
-
I need help accessing and exporting logs from a Dahua doorbell.
I’m a developer trying to access doorbell unlock logs via an API so I can display them in other systems, but I can’t find any API endpoint or permission that exposes these logs. I do have SSH access to the device, but I don’t have root privileges, so I’m unable to access system files or code...- leonardokoleci
- Thread
- dahua doorbell logs
- Replies: 1
- Forum: Doorbells
-
QTH916 DVR just stopped working
So I need some advice, I have an old Q-SEE cameras set up at my business back from before they went out of business. The camera's I have are QTH8056DA and I've got 8 of them. I was just trying to figure out how to get their specs or figure out what other Dahua rebranded DVR's would work with my...- cpmnoob
- Thread
- dahua q-see
- Replies: 3
- Forum: NVR's, DVR's & Computers
-
Review - EmpireTech IPC-T54PRO-AS 1/1.8" CMOS 4MP WizColor
Hi everyone, here is a review of the new IP camera I purchased from Andy, the T54PRO-AS, which is likely a sibling model to Dahua’s recent HDW5459H-ASE-PV-PRO. It features a 4-megapixel sensor paired with an f/1.0 lens. The camera supports Smart Dual Light (IR + warm light) and includes a... -
F
Slow download speed of recordings in SmartPSS Lite
Hi everyone! Let me explain my setup. I have a Dahua WizMind Series 5 IP camera installed in a sports complex. It’s connected via PoE to a Hikvision PoE switch, which in turn is connected to the ISP’s router. Recordings are stored directly on the camera using a 512GB SanDisk Ultra microSD... -
F
Slow download speed of recordings in SmartPSS Lite
Hi everyone! Let me explain my setup. I have a Dahua WizMind Series 5 IP camera installed in a sports complex. It’s connected via PoE to a Hikvision PoE switch, which in turn is connected to the ISP’s router. Recordings are stored directly on the camera using a 512GB SanDisk Ultra microSD... -
F
Slow download speed of recordings in SmartPSS Lite
Hi everyone! Let me explain my setup. I have a Dahua WizMind Series 5 IP camera installed in a sports complex. It’s connected via PoE to a Hikvision PoE switch, which in turn is connected to the ISP’s router. Recordings are stored directly on the camera using a 512GB SanDisk Ultra microSD... -
P
problem with 00000000 in HAC‑HFW1509TLM‑A‑LED‑S2
Hello, i have problem with 3 camera dahua HAC‑HFW1509TLM‑A‑LED‑S2 in low resolution that show me 00000000 on bottom right position, i can't enter in osd menu, and cant change video format to 5mp any idea how i can resolve this problem? i read some place where i can switch video format by little... -
P
How to center bounding box using 3D move without changing zoom with the Dahua HTTP API.
Hi, I’m controlling a Dahua PTZ through the HTTP CGI interface. The moveDirectly command works well for centering a bounding box from image coordinates, but it always performs a zoom-in so the selected rectangle fills the frame. I need to keep the current zoom level exactly as it is, just...- PTZControllerSA
- Thread
- dahua http api move
- Replies: 1
- Forum: Dahua
-
Network Firewall Rules for Dahua Remote Access
Hi all, I am busy securing my camera network. I have put my NVR, cameras, VTO and VTH on their own VLAN without internet access. I have managed to get them all working on the local network, but now I want to get the DMSS app to work remotely so that I can view the cameras remotely, and so...- davidbann
- Thread
- cybersecurity dahua dmss firewall network security
- Replies: 5
- Forum: Cyber Security
-
O
DAHUA Can't see the camera preview because of the certificate, NVR not loading after setting https
Hello, I have an issue. Some of the cameras that my company uses require to install a certificate even though it is installed. I tried the solution with setting the NVR to https and after that the site doesn't load. Multiple NVRs have similar issue, alas they are scattered around the country so...- ololo12345
- Thread
- certificate dahua https nvr
- Replies: 0
- Forum: Dahua
-
M
Balanced Dahua night settings
Hi. I am a new Dahua users. I have a bunch of the 4Mp wiz color night color cameras. I am curious if there are optimal balanced settings for night color cameras? On one hand I like the visibility but then if someone walks by the camera their face gets blurry. I have found articles where I mess... -
R
WTS Non-working Outdoor security camera Dahua Network PTZ DH-SD59430U-HNI $75
Camera is in excellent condition (never ran it in survey mode, just manually positioned very rarely to focus on parts of pond animals were getting into. Does full start up (all the motions to set up position encoders) but stopped communicating on Ethernet. Has original power supply. An...- rubidium7
- Thread
- commercial dahua high quality professional ptz
- Replies: 8
- Forum: Cameras, NVR / DVR's, hardware & more
-
Dahua / DMSS playback issues
Hello. I've noticed a strange problem. I have been getting notifications of motion from my Homekit (via scrypted) but not DMSS. When i log into DMSS to check why, i am noting no events for that time period and when i try to play, it literally jumps over it and goes back 30+ minutes... like the...- Nighthawk37
- Thread
- dahua dmss nvr playback
- Replies: 2
- Forum: Dahua
-
Setting Up a Firewall for Dahua PTZ — Is an Isolated Subnetwork Necessary?
I'm looking into setting up a firewall for our Dahua PTZ unit. I want to make sure it’s protected from the main network it’s currently hosted on. From what I understand, we’d need to create our own subnetwork, which is then protected independently. We would block any inbound connections, and the...- iSnapper3000
- Thread
- blue iris cctv dahua firewall network security ptz subnet tailscale vpn
- Replies: 3
- Forum: Dahua
-
New Dahua UI motion / VCA setup question
For the newer Dahua cameras with the updated UI, i have a quesiton regarding motion detection. With the old Dahua UI I have IVR setup with trip wire and all of that. I have that as well this time although the settings are labeled a little different. It's under VCA settings (under smart...- Nighthawk37
- Thread
- dahua motion detect vca
- Replies: 0
- Forum: Dahua
-
C
RTSP stream of all channels grid from Dahua NVR?
Hi, Is it possible for the current Dahua NVRs to stream a grid of all channels on an rtsp url? I can do this on Hikvision NVRs for displaying a grid to home automation touchscreens and then touching the area for each channel loads the full screen rtsp for that channel, but I know this isn't a... -
EmpireTech NVR / Camera Tripwire / motion settings?
I'm not sure if this is technically an NVR question or a camera question but i received my NVR16CH-16P-2XI and Color IPC-4k cameras. I get that these are supposed to be white-labeled Dahua cameras but overall this feels like a huge step backwards. The first thing i noticed is that as soon as i...- Nighthawk37
- Thread
- dahua empiretech motion detection
- Replies: 7
- Forum: NVR's, DVR's & Computers
-
S
Help me choose between these cams?
Need a little help deciding. — Dahua vs Hikvision + one 180° cam? • All rounder + low light performance? Dahua IPC-HDW5859H-ZE-PV-PRO or Hikvision DS-2CD2387G3-LIS2UY/SL and one 180° cam: Hikvision DS-2CD2387G2P-LSU/SL or Dahua IPC-PDW3849-A180-AS-PV -
I
Alternative 1/1.8" Sensor option for IP camera in Australia
Just looking if anyone has any alternatives in the Australian market to the 5442 range of Dahua & 2CD3267G3 Hikvision cameras that have a 1/1.8" sensor & IR or multi light not just white light for illumination. Looking to put together a 3 - 4 camera system all outside with only 1 having a sensor... -
Dahua v5 upgrade questions / Empiretech Taurus
Hi. I just received my new empiretech gear and was wanting to upgrade to Dahua v5. I started looking up firmware updates and model numbers and noticed that Empiretech firmware is from "Taurus Platform". Is this a replacement for the Dahua UI? Or a rebranded firmware? Either way, is it possible...- Nighthawk37
- Thread
- dahua empiretech firmware
- Replies: 10
- Forum: NVR's, DVR's & Computers
-
Upgrading dahua NVR - swapping hard drives
I just got a shiny new NVR. I have a 4tb premium drive in my old NVR and was going to take the drive out and swap it. Do I need to format it, or do anything special ? Or will the NVR prompt me to do everything- Nighthawk37
- Thread
- dahua hard drive nvr
- Replies: 3
- Forum: NVR's, DVR's & Computers
-
ANPVIZ
I'm a BI user for a very long time. Actual equipment (W10pro, 64GB RAM, 24" ACER 2560x1440 ) 1 Gbi CAT5 LAN w/ POE switch for 2 brandnew ANPVIZ uprime PTZ "ANPVIZ PTZ30A60WD-SA-5X(A)" and 2 seasoned DAHUA SD-22204. The Dahua's working after a long time of crying and praying. :cool: Dahua's...- wall46
- Thread
- anvpiz dahua
- Replies: 3
- Forum: IP Cameras
-
W
Dahua - NVR4108HS-4KS3 Custom RTSP Help
Hey all, i bought this NVR4108HS-4KS3 and it is missing the Custom add option to add RTSP Camera. Is there a hack or custom firmware i can use to enable that? Please help- wastedtimes_33
- Thread
- dahua
- Replies: 4
- Forum: Firmware
-
J
Dahua / Empiretech IVS feed with Blue Iris - missing ONVIF source data field
I struggled for 10+ hours to get IVS from my Empiretech/Dahua camera to feed properly into Blue Iris. I finally figured out the issue, so I thought I would share it here. The key thing I missed (and didn't see in the dozen or so other forum threads) was that I needed to add "00000" to the ONVIF...- Jabberjaw123
- Thread
- blue iris dahua ivs
- Replies: 10
- Forum: Troubleshooting
