Search results

  1. D

    5.5.5.13 single click

    Is just restored to a new system because of a hard drive failure and everything works perfectly except one function. In the past, I could click on the camera for it to go full screen, but now I have to double click. I looked through all the settings but can't find what needs to be changed thank you.
  2. D

    Upgrade to IP2M-841W

    Guys - IP2M-841W has served me well but in one room where I don't have the strongest wifi signal, the video works but the mic doesn't work too well. When I speak into the blue iris IOS app, the audience simply listen some squeaky noise and can't decipher the words at all. Is there an upgrade to...
  3. D

    New folder

    Guys - just for one camera, when I click on the 12pm or any prior file, it seems to bring up the 12-4am file. Other camera new files works perfectly well. How do I troubleshoot this? I see the file was created for the 12-4pm in the folder. Thanks
  4. D

    ip2m-841ew alternative

    Guys - I have 4 of these at home (all wired ethernet) and they've worked great with Blue Iris. Need to add one more and wondering if I should go for the same or if it's there an alternate model I should look into to tie into blue iris. This new one will sit in the garage and 1080p is sufficient...
  5. D

    Ignore object

    I have a few zones set up, which works fine, but I get many false positives from a compost bin. Is there any functionality within Blue Iris to ignore a part of the scene completely? It’s very small, perhaps 5% of the scene thanks
  6. D

    False alert

    Guys - not sure if I can solve this. The neighbor has a new flood light pointing directly at my camera and he set his sensitivity level so low it comes on/off literally every 2-3 mins even if no human is detected At 2:27:36 it sent an image to deep stack to analyze that put it as 60% person...
  7. D

    Make time

    Guys - I get most of my alerts consistently walking out of my front door to the sidewalk (B-C zones configured). However, if I leave really quickly, there's no alert - is that something to do with the make time that's currently 0.6 - should I try making it 0.1 Also side question - in deepstack...
  8. D

    Deep stack

    BI 5.5.5.13 and deepstack 2022.01.01 CPU Guys- deep stack has worked well for me except recently so not looking to make the switch out of it. I reinstalled because it was giving me timeout messages and now it’s working but all my alerts are showing OCCUPIED. I’m assuming only alerts that are...
  9. D

    Video detection setting

    Guys - I rely completely on blue iris motion detection to trigger alerts and have set zones there. Hence, within Dahua's console, should I uncheck all boxes under Event - Video detection (motion detection, video tampering, scene changing). Some of the boxes are checked but trying to disable...
  10. D

    DST time

    IPC-HDW5231R-ZE 2.800.0000013.0.R, Build Date: 2019-12-02 Guys - it's weird that cameras I've had for 4 years (untouched with no settings changes) are now malfunctioning with showing correct time when DST changes occur. See below screenshot for my settings but on blue iris which also hasn't...
  11. D

    Deep stack

    Folks - Can I upgrade Deepstack v2021.02.1 to a newer version without upgrading Blue Iris which is at 5.5.5.13. Hoping it has better accuracy after 3 year when I initially deployed it. Also if there is something newer and free similar to deep stack, I'm open to trying it. thanks
  12. D

    Amcrest IP2M-841W speaker not working

    Guys - I have an Amcrest IP2M-841W configured identical to the other ones where I can use the mobile app, press and hold the mic button. Blue Iris settings has Audio capture hardware configured correctly and I have 3 cameras where speaker is working fine. Any troubleshooting tips? Side question...
  13. D

    Recording two time stamps

    Folks - on the recording only (not live video), I see two time stamps. Is there a mobile app option that I should change so that there is only one time stamp? Thanks
  14. D

    2 time stamps

    Guys - when viewing live video with web console or my mobile app, there is only 1 time stamp on the top but recordings/alerts show 1 at the top and 1 at the bottom and they aren't in sync. I'd prefer to just have a single time stamp. How do I accomplish this and can somebody explain the source...
  15. D

    Camera time

    Guys - oddly enough, out of all 6 Dahua cameras purchased all from Andy, only one has only recently started giving me time zone issues. Super odd given nothing has changed and it's worked perfectly well for over 2 years. Same software running on all cameras too. Any troubleshooting I can do...
  16. D

    WPA3 SAE support

    Do the Amcrest cameras like ip2m-841W support wpa3 sae? Unlikely but I thought I'll ask since it's more secure than wpa2-personal thanks
  17. D

    Access camera footage on Mac

    Has anybody found a solution to use a plugin or anything else on a Mac? I like to access footage directly on the camera console to pan/tilt since it doesn't work very well on blue iris for me https://ipcamtalk.com/threads/safari-plugin-for-dahua-ipcs.26054/page-3 If a plugin doesn't exist for...
  18. D

    Running old version of deep stack

    Guys - have there been any major changes with accuracy with deep stack? I'm running an old version 2021.02.1 and it works well about 80% of the time but I still get quite a few alerts from just motion lights going off in the neighbor's house that it sees as a person. Can anybody who's been using...
    • dohat leku
    • Thread
    • deep stack
    • Replies: 0
    • Forum: AI
  19. D

    camera didn't adjust for time zone change

    Guys - I have 2 dahua IPC-HDW5231R-ZE which are identical with hardware & software/firmware revisions. One automatically adjusted for day light savings while I noticed the other one didn't till I rebooted it. Isn't that odd and how do I avoid such future occurrences? Also is there a newer...
  20. D

    Downloads link

    Folks - Where can I download this specific version? 5.5.5.13 x64 release date 2022/03/11 Thanks
  21. D

    Automatic IR control not working on Amcrest cameras

    Guys I am not sure if this is the right forum to post this. Since last week, the automatic infrared control on my camera does isn't working. It has always worked in the past. I may have mistakenly clicked the light icon on the mobile application and have been having issues since then. Obviously...
  22. D

    IPC-HDW5231R-ZE Profile-S ?

    Does anybody know if IPC-HDW5231R-ZE supports Profile-S? just looking to buy a new home security panel that supports only Profile-S Thank you
  23. D

    North east DST time settings

    Guys - did this wrong and I think I know how to put in the correct setting but don't want to solely rely on my judgement. If somebody can do a screenshot from your camera, that'd be appreciated !!
  24. D

    Muffled audio

    Couldn't attach this format so uploaded it here - Vocaroo | Online voice recorder guys - I didn't do any upgrades the last few months and suddenly my BI audio from all cameras is muffled (attached sample). I then did an upgrade to 5.5.1.2 stable to see if it'll help but the problem has...
  25. D

    Remote desktop

    Guys - not sure how much help you can provide me on this but the last week, I've had issues with doing RDP into my blue iris windows 10 computer (it doesn't run anything else at all). I upgraded to the latest version of BI too but the problem persists. I typically do an RDP and just minimize the...
  26. D

    Web UI console not working correct

    guys - my web UI console accessed through chrome browser suddenly only shows the camera footage and none of the side bars with alerts, etc. Even after I click on the camera, it only shows me the actual camera video feed but no bars at the bottom to move back video, record and download, take...
  27. D

    Event logging

    folks - is there a detailed log that could show me who logged into my camera interface through web gui or another method and at what time Thx
  28. D

    Event log

    folks - is there a detailed log that could show me who logged into, at what time and how long Thx
  29. D

    Time stamps

    folks - my BI time stamps are off but the Amcrest camera settings and Dahua are on. In BI console, I notice the time stamp is only on the top right but in alerts and stored videos, it's on the top right & bottom right. It displays the same time down to the second for every camera except for one...
  30. D

    File name

    folks - all my cameras are saving correctly using year-mm-dd-cameraname format but this particular camera saves as cameraname-year-mm-dd for some reason. How do I correct it? Here's what I pulled from camera settings and wonder if I have to change it at another place too. Thanks
Top Bottom