Search results

  1. Bruce_H

    PTZ only not working in Blue Iris

    Are you asking about using the camera in your hardware "NVR" or with the BlueIris NVR Software?
  2. Bruce_H

    Lost cameras after upgrade

    Perhaps you could share what the solution was for the sake of other users? You have also just discovered why keeping old cameras around is not worth it!
  3. Bruce_H

    Lost cameras after upgrade

    The make and model of the camera might help some one to make some suggestions?? Also the version of BI 6 that you are currently on; not sure if it is relevant or not but more information won't hurt?
  4. Bruce_H

    BI V6 license key

    Make sure you use the support link in the BI6 help, this info must be in the email or support may not get your email!
  5. Bruce_H

    Honey I shrunk the clips

    Put your mouse over the clips list (you may have to click on 1 of the items) then press and hold down the <CTRL> key and scroll the mouse wheel up or down to get it back to the size you want!
  6. Bruce_H

    Blue Iris 6.0.1 - Android App getting "Unable to connect...xx.. Reason: connection limit, try again later."

    Do you have BI set to automatically do updates by any chance?
  7. Bruce_H

    How to remotely reset the no signal counter with the app or UI3

    On a side note, the system that I was looking at had some very high loss of signal for a couple of cameras (643 & 401 for 1 day!) so I started to look at the camera config to try and find what the problem was. It did not take me long to notice that on the "Watchdog" tab, the option "Interpret...
  8. Bruce_H

    How to remotely reset the no signal counter with the app or UI3

    I checked on my 3 systems and only one of them has any cameras with a no signal count, the same number is shown in the BI log as shows up in the camera list etc., so I quite confident that starting a new log file each day will effectively reset the no signal counter for each camera! I suspect...
  9. Bruce_H

    How to remotely reset the no signal counter with the app or UI3

    If that counter is the same as the one in the BI log then there is a way to have it reset daily by changing the log file to restart each day, in the BI app open the status window, go to the log tab and change the log file name to be this "%Y%m%d.txt", a new log file will be created each day...
  10. Bruce_H

    How to remotely reset the no signal counter with the app or UI3

    Is that in the BI app or UI3, I found something similar in UI3, but it looks different from yours!
  11. Bruce_H

    How to remotely reset the no signal counter with the app or UI3

    Perhaps you could clarify what you are referring to as the "no signal" counter, is the counter you are looking at in the BI log or in the BI Status Camera tab or something else entirely?
  12. Bruce_H

    How To Revert to previous versions on blue Iris

    Probably will be OK, they are stored in the same place in the computer registry for V5 and V6. I have never done it or needed to go back to V5 from V6 HKEY_LOCAL_MACHINE\SOFTWARE\Perspective Software\Blue Iris
  13. Bruce_H

    Just Upgraded to V6, One Camera keeps going down!

    6.0.1.15 was just released don't think there is anything that might relates to this camera problem, might be worth a try!
  14. Bruce_H

    Help! Need full version of BI 5 - BI 6 causing SERIOUS issues

    6.0.1.15 was just released don't think there is anything that might relates to this camera problem
  15. Bruce_H

    Help! Need full version of BI 5 - BI 6 causing SERIOUS issues

    @looney2ns He has asked about the same camera problem in another thread already https://ipcamtalk.com/threads/just-upgraded-to-v6-one-camera-keeps-going-down.84427/ I think all he is wanting in this thread is a full install of BI5
  16. Bruce_H

    Just Upgraded to V6, One Camera keeps going down!

    Did you try the camera direct connected with an Ethernet cable? Viewing the camera with multiple devices could possible create a high bandwidth situation for the camera that it can not get through the powerline ethernet device, or simply the camera can not sustain. I can't explain why this...
  17. Bruce_H

    [Release] OpenVINO for BI

    What language is it currently in that it needs translation, all your screen captures show English?
  18. Bruce_H

    Reducing CPU Usage

    Do not spin the fans on GPU cards with compressed air it has been known to generate voltage spikes and blowup the cards! In any case best not to use excess air on any cooling fan, keep the nozzle well away!
  19. Bruce_H

    Just Upgraded to V6, One Camera keeps going down!

    Is this camera connected via an powerline ethernet adapter, have you considered the possibility that it might be the bottle neck, I have never used one but have wondered if using your electrical wiring to transmit streaming data is a good idea???? Could you connect the problematic camera...
  20. Bruce_H

    Amcrest IP Cam Two Way Comms Not Working

    @tbrazas "Its not for democrats...it takes some brains". Please this is not the place for political commentary, let's stay focused on the software!
  21. Bruce_H

    Just Upgraded to V6, One Camera keeps going down!

    Have you tried to disable the camera, I have read about corrupted camera configs that will cause the entire BI system to become unstable or unresponsive! I am not sure what would be involved in going back to V5, do you have a v5 and V6 BI showing when you look at installed apps, did you do an...
  22. Bruce_H

    How do you get LPR to work in Blue Iris?

    There are several threads on issues with the LPR system, have you looked at them, here is one of them Blue Iris Version 6 License Plate Custom Model Sorry I know anything further as I don't use the LPR system, and have no need for it!
  23. Bruce_H

    How do you get LPR to work in Blue Iris?

    Are you also having high cpu usage issues in another thread, could this be preventing the LPR system from working correctly due to delays in processing, just a guess?
  24. Bruce_H

    How do you get LPR to work in Blue Iris?

    I know nothing about the LPR system, but it may be useful to confirm the version of BI you are using and are you using the built in AI or the external CPAI, have you looked in canceled alerts, to see what is there, have you enabled the DAT file option for that camera, is the camera detecting the...
  25. Bruce_H

    Reducing CPU Usage

    @wittaj In your experience would the cameras using H265 encoding have any effect on his CPU usage?
  26. Bruce_H

    Just Upgraded to V6, One Camera keeps going down!

    When you restart BI are you just closing the console or are you restarting the BI Service? Have you looked in the status at the log file, any errors that refer to the problematic camera? When the camera freezes, have you tried to access the camera directly via its web page, does the camera...
  27. Bruce_H

    Reducing CPU Usage

    No Unfortunately, turning on hardware acceleration might improve things if you were only using the main stream, but when using the sub stream it actually use more CPU cycles than it saves, at least that is my understanding! You would have to verify on your own system to see what effect it has!
  28. Bruce_H

    Why did they remove the "show disabled cameras" menu button??? How to get back a disabled camera.

    Here it is on Version 6.0.1.13, you can clearly see the menu options to "Show hidden cameras" and "Hide Disabled cameras"
  29. Bruce_H

    Tool to convert BVR to MP4

    Why not use the built in Convert/Export in UI3?
  30. Bruce_H

    BI4 and DS-2SE4C425MWG-E/14(F0) TandemVu

    I have no idea about BI 4, certainly going 5 to 6 it is best to not uninstall 5 before going to 6, I guess it would depend on where BI 4 is installed on the hard drive and where BI 4 stores it settings in the registry, as you say I have not heard of anyone yet going from 4 to 6, I would suggest...
Top Bottom